Machinability of Calcium Steel in Deep Hole Drilling with Small Diameters Gun Drills; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
| Parent link: | Applied Mechanics and Materials: Scientific Journal Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014).— 2015.— [P. 116-119] |
|---|---|
| Hovedforfatter: | |
| Institution som forfatter: | |
| Andre forfattere: | |
| Summary: | Title screen The information about machinability of two steel – with calcium additives and without in gundrilling are given. Experimentally determined technological characteristics of calcium steel AC41Cr4 machinability in deep hole drilling with the gun drills of diameter 2.05 mm. The results of measurement fluctuation of average diameters of holes and surface roughness are given. Microphotographs of different forms of chips after gundrilling are presented. Information about steel with calcium additives machinability was described. Режим доступа: по договору с организацией-держателем ресурса |
| Sprog: | engelsk |
| Udgivet: |
2015
|
| Serier: | Mechanical Engineering, Processing and Surface Engineereng, Metals Treatment, Equipment and Tools |
| Fag: | |
| Online adgang: | http://dx.doi.org/10.4028/www.scientific.net/AMM.756.116 |
| Format: | MixedMaterials Electronisk Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=641288 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 641288 | ||
| 005 | 20231101134146.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\6188 | ||
| 035 | |a RU\TPU\network\6185 | ||
| 090 | |a 641288 | ||
| 100 | |a 20150515a2015 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Machinability of Calcium Steel in Deep Hole Drilling with Small Diameters Gun Drills |f S. V. Kirsanov, A. S. Babaev | |
| 203 | |a Text |c electronic | ||
| 225 | 1 | |a Mechanical Engineering, Processing and Surface Engineereng, Metals Treatment, Equipment and Tools | |
| 300 | |a Title screen | ||
| 330 | |a The information about machinability of two steel – with calcium additives and without in gundrilling are given. Experimentally determined technological characteristics of calcium steel AC41Cr4 machinability in deep hole drilling with the gun drills of diameter 2.05 mm. The results of measurement fluctuation of average diameters of holes and surface roughness are given. Microphotographs of different forms of chips after gundrilling are presented. Information about steel with calcium additives machinability was described. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\5920 |t Applied Mechanics and Materials |o Scientific Journal | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\6028 |t Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014) |o International Conference, 16‐18 October, 2014, Tomsk, Russia |o [proceedings] |f National Research Tomsk Polytechnic University (TPU) |v [P. 116-119] |d 2015 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a механическая обработка | |
| 610 | 1 | |a шероховатости | |
| 610 | 1 | |a стойкость | |
| 610 | 1 | |a инструменты | |
| 700 | 1 | |a Kirsanov |b S. V. |c specialist in the field of mechanical engineering |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1949- |g Sergey Vasilyevich |2 stltpush |3 (RuTPU)RU\TPU\pers\32935 | |
| 701 | 1 | |a Babaev |b A. S. |c specialist in the field of mechanical engineering |c Assistant of the Department of Tomsk Polytechnic University |f 1989- |g Artem Sergeevich |2 stltpush |3 (RuTPU)RU\TPU\pers\32936 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт кибернетики (ИК) |b Кафедра технологии автоматизированного машиностроительного производства (ТАМП) |h 1607 |2 stltpush |3 (RuTPU)RU\TPU\col\18705 |
| 801 | 2 | |a RU |b 63413507 |c 20161229 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.4028/www.scientific.net/AMM.756.116 | |
| 942 | |c CF | ||