Machinability of Calcium Steel in Deep Hole Drilling with Small Diameters Gun Drills
| Parent link: | Applied Mechanics and Materials: Scientific Journal Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014).— 2015.— [P. 116-119] |
|---|---|
| Հիմնական հեղինակ: | |
| Համատեղ հեղինակ: | |
| Այլ հեղինակներ: | |
| Ամփոփում: | Title screen The information about machinability of two steel – with calcium additives and without in gundrilling are given. Experimentally determined technological characteristics of calcium steel AC41Cr4 machinability in deep hole drilling with the gun drills of diameter 2.05 mm. The results of measurement fluctuation of average diameters of holes and surface roughness are given. Microphotographs of different forms of chips after gundrilling are presented. Information about steel with calcium additives machinability was described. Режим доступа: по договору с организацией-держателем ресурса |
| Լեզու: | անգլերեն |
| Հրապարակվել է: |
2015
|
| Շարք: | Mechanical Engineering, Processing and Surface Engineereng, Metals Treatment, Equipment and Tools |
| Խորագրեր: | |
| Առցանց հասանելիություն: | http://dx.doi.org/10.4028/www.scientific.net/AMM.756.116 |
| Ձևաչափ: | Էլեկտրոնային Գրքի գլուխ |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=641288 |
| Ամփոփում: | Title screen The information about machinability of two steel – with calcium additives and without in gundrilling are given. Experimentally determined technological characteristics of calcium steel AC41Cr4 machinability in deep hole drilling with the gun drills of diameter 2.05 mm. The results of measurement fluctuation of average diameters of holes and surface roughness are given. Microphotographs of different forms of chips after gundrilling are presented. Information about steel with calcium additives machinability was described. Режим доступа: по договору с организацией-держателем ресурса |
|---|---|
| DOI: | 10.4028/www.scientific.net/AMM.756.116 |