The effect of friction stir welding tool wear on the weld quality of aluminum alloy AMg5M; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
| Parent link: | AIP Conference Proceedings Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014.— 2014.— [P. 635-638] |
|---|---|
| Հիմնական հեղինակ: | |
| Համատեղ հեղինակ: | |
| Այլ հեղինակներ: | , |
| Ամփոփում: | Title screen Friction stir welding (FSW) tool wear has been studied from the standpoint of tribological layer generation and interaction of this layer with the tool’s metal. It was shown that during FSW on aluminum alloy the latter adheres to the tool’s working surface and then iron/aluminum reaction diffusion is initiated under the conditions of high mechanical stress and temperature. Since diffusion along the former austenite grain boundaries is much faster than volume diffusion, an intermetallic compound is formed inside the tool’s metal thus causing embrittlement and pulling out the tool’s metal fragments. Режим доступа: по договору с организацией-держателем ресурса |
| Լեզու: | անգլերեն |
| Հրապարակվել է: |
2014
|
| Խորագրեր: | |
| Առցանց հասանելիություն: | http://dx.doi.org/10.1063/1.4901501 http://earchive.tpu.ru/handle/11683/35759 |
| Ձևաչափ: | Էլեկտրոնային Գրքի գլուխ |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=640024 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 640024 | ||
| 005 | 20240226103359.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\4554 | ||
| 090 | |a 640024 | ||
| 100 | |a 20150408a2014 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a US | ||
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a The effect of friction stir welding tool wear on the weld quality of aluminum alloy AMg5M |f S. Yu. Tarasov, V. E. Rubtsov, Е. А. Kolubaev | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: p. 638 (10 tit.)] | ||
| 330 | |a Friction stir welding (FSW) tool wear has been studied from the standpoint of tribological layer generation and interaction of this layer with the tool’s metal. It was shown that during FSW on aluminum alloy the latter adheres to the tool’s working surface and then iron/aluminum reaction diffusion is initiated under the conditions of high mechanical stress and temperature. Since diffusion along the former austenite grain boundaries is much faster than volume diffusion, an intermetallic compound is formed inside the tool’s metal thus causing embrittlement and pulling out the tool’s metal fragments. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\4816 |t AIP Conference Proceedings | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\4814 |t Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014 |o [proceedings] |f National Research Tomsk Polytechnic University (TPU) |v [P. 635-638] |d 2014 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a wear | |
| 610 | 1 | |a friction | |
| 610 | 1 | |a трение | |
| 610 | 1 | |a сварочные инструменты | |
| 610 | 1 | |a сварка | |
| 610 | 1 | |a сплавы алюминия | |
| 610 | 1 | |a ротационная сварка | |
| 610 | 1 | |a диффузия | |
| 610 | 1 | |a износ | |
| 610 | 1 | |a механические напряжения | |
| 610 | 1 | |a температура | |
| 610 | 1 | |a интерметаллические соединения | |
| 700 | 1 | |a Tarasov |b S. Yu. |c specialist in the field of mechanical engineering |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1959- |g Sergei Yulievich |3 (RuTPU)RU\TPU\pers\31400 |9 15572 | |
| 701 | 1 | |a Rubtsov |b V. E. |c physicist |c engineer Tomsk Polytechnic University, candidate of physical and mathematical Sciences |f 1970- |g Valery Evgenjevich |3 (RuTPU)RU\TPU\pers\34118 | |
| 701 | 1 | |a Kolubaev |b Е. А. |c physicist |c engineer of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1979- |g Evgeny Aleksandrovich |3 (RuTPU)RU\TPU\pers\34115 |9 17655 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра физики высоких технологий в машиностроении (ФВТМ) |3 (RuTPU)RU\TPU\col\18687 |
| 801 | 2 | |a RU |b 63413507 |c 20170109 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.1063/1.4901501 | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/35759 | |
| 942 | |c CF | ||