Structure and wear resistance of electron-beam nitrous coatings; Journal of Friction and Wear; Vol. 33, iss. 5
| Parent link: | Journal of Friction and Wear: Scientific Journal Vol. 33, iss. 5.— 2012.— [P. 374-380] |
|---|---|
| Körperschaften: | , |
| Weitere Verfasser: | , , , , |
| Zusammenfassung: | Title screen The paper deals with the study of the tribological properties of nitrogen-containing austenite coatings deposited by electron-beam facing during abrasive wear and the sliding friction of a VK6 hard alloy indentor. The abrasive wear resistance of the nitrous coatings deposited by the electron-beam facing of steel 60Kh24AG16 powder in quartz sand is lower than that of the steel 65G coatings after hardening; it increases with increasing mass share of the filler. At contents of nitrided ferrovanadium of 10–30 wt % the abrasive wear rate increases by 30–50%, respectively. It is found that under a certain load applied to the VK6 ball indentor the friction coefficient and the shear resistance of the surface layer diminish. It is shown that under heavy specific loads applied to the ball indentor the nitrous coating faced from steel 60Kh24AG16 powder and composite nitrous coatings have wear resistance exceeding that of steels 110G13 and Kh18N10 by more than two and seven times, respectively. Based on the results of structural studies an explanation of the observed behavior of the nitrous coatings is proposed. Режим доступа: по договору с организацией-держателем ресурса |
| Sprache: | Englisch |
| Veröffentlicht: |
2012
|
| Schlagworte: | |
| Online-Zugang: | http://dx.doi.org/10.3103/S106836661205008X |
| Format: | MixedMaterials Elektronisch Buchkapitel |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=638047 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 638047 | ||
| 005 | 20250124160549.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\2254 | ||
| 035 | |a RU\TPU\network\2253 | ||
| 090 | |a 638047 | ||
| 100 | |a 20141125d2012 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a RU | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Structure and wear resistance of electron-beam nitrous coatings |f N. A. Narkevich [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: p. 380 (11 tit.)] | ||
| 330 | |a The paper deals with the study of the tribological properties of nitrogen-containing austenite coatings deposited by electron-beam facing during abrasive wear and the sliding friction of a VK6 hard alloy indentor. The abrasive wear resistance of the nitrous coatings deposited by the electron-beam facing of steel 60Kh24AG16 powder in quartz sand is lower than that of the steel 65G coatings after hardening; it increases with increasing mass share of the filler. At contents of nitrided ferrovanadium of 10–30 wt % the abrasive wear rate increases by 30–50%, respectively. It is found that under a certain load applied to the VK6 ball indentor the friction coefficient and the shear resistance of the surface layer diminish. It is shown that under heavy specific loads applied to the ball indentor the nitrous coating faced from steel 60Kh24AG16 powder and composite nitrous coatings have wear resistance exceeding that of steels 110G13 and Kh18N10 by more than two and seven times, respectively. Based on the results of structural studies an explanation of the observed behavior of the nitrous coatings is proposed. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t Journal of Friction and Wear |o Scientific Journal | ||
| 463 | |t Vol. 33, iss. 5 |v [P. 374-380] |d 2012 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a электронно-лучевые покрытия | |
| 610 | 1 | |a азотистые покрытия | |
| 701 | 1 | |a Narkevich |b N. A. | |
| 701 | 1 | |a Tagil’tseva |b D. N. | |
| 701 | 1 | |a Durakov |b V. G. | |
| 701 | 1 | |a Shulepov |b I. A. |c physicist |c Engineer-designer of Tomsk Polytechnic University, Candidate of physical and mathematical sciences |f 1954- |g Ivan Anisimovich |3 (RuTPU)RU\TPU\pers\33092 | |
| 701 | 1 | |a Darenskaya |b E. A. |c specialist in the field of material science |c Associate Professor of Tomsk Polytechnic University, Candidate of technical sciences |c maiden name Ivanova |f 1982- |g Elena Anatolievna |3 (RuTPU)RU\TPU\pers\33039 |9 16874 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Физико-технический институт (ФТИ) |b Центр измерений свойств материалов (ЦИСМ) |3 (RuTPU)RU\TPU\col\19361 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра материаловедения в машиностроении (ММС) |3 (RuTPU)RU\TPU\col\18688 |
| 801 | 2 | |a RU |b 63413507 |c 20151217 |g RCR | |
| 856 | 4 | |u http://dx.doi.org/10.3103/S106836661205008X | |
| 942 | |c CF | ||