Effect of stresses and strains on impurity redistribution in a plate under uniaxial loading; Journal of Applied Mechanics and Technical Physics; Vol. 51, iss. 3
| Parent link: | Journal of Applied Mechanics and Technical Physics: Scientific Journal Vol. 51, iss. 3.— 2010.— [P. 422-430] |
|---|---|
| מחבר ראשי: | Mykolaychuk M. A. Mikhail Aleksandrovich |
| מחברים אחרים: | Knyazeva A. G. Anna Georgievna |
| סיכום: | Title screen A model for the saturation of the surface layer of a thin metal plate with an impurity from the environment under uniaxial mechanical loading is proposed and investigated. The effect of stresses and strains on the diffusion process is analyzed. It is shown that, first, due to the deformation of the crystal lattice of the base, stresses that occur in local volumes lead to a change in the diffusion activation energy; second, stresses influence impurity transfer (this effect is similar to mass transfer by pressure diffusion in liquids). The joint effect of the two types of influences of stresses and strains on the behavior of the system at various geometrical and physical sample parameters is numerically investigated. Режим доступа: по договору с организацией-держателем ресурса |
| שפה: | אנגלית |
| יצא לאור: |
2010
|
| נושאים: | |
| גישה מקוונת: | http://link.springer.com/article/10.1007/s10808-010-0057-3 |
| פורמט: | אלקטרוני Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=637943 |
פריטים דומים
Strain-Induced Surface Roughening in Polycrystalline VT1-0 Titanium Specimens under Uniaxial Tension; Physical Mesomechanics; Vol. 21, iss. 3
יצא לאור: (2018)
יצא לאור: (2018)
Uniaxial Stress and Electron Irradiation Effects on Nanochains Straightening in Film Polymer Materials; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
יצא לאור: (2018)
יצא לאור: (2018)
Micromechanical model of deformation-induced surface roughening in polycrystalline materials; Physical Mesomechanics; Vol. 20, iss. 3
יצא לאור: (2017)
יצא לאור: (2017)
Evaluation of the Influence of the Location Solid-State Inclusions on the Amplitude-Frequency Characteristics under Pulsed Acoustic Excitation in the Process of Uniaxial Compression; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
מאת: Dann D. D. Denis Dmitrievich
יצא לאור: (2019)
מאת: Dann D. D. Denis Dmitrievich
יצא לאור: (2019)
Relation between damage processes of reinforced concrete under uniaxial compression and electric response to pulsed mechanical impact; Procedia Structural Integrity; Vol. 10 : 1st International Conference of the Greek Society of Experimental Mechanics of Materials,Athens, May 10-12, 2018
מאת: Petrov M. V. Maksim Vyacheslavovich
יצא לאור: (2018)
מאת: Petrov M. V. Maksim Vyacheslavovich
יצא לאור: (2018)
Влияние напряжений и деформаций на перераспределение примеси в пластине в условиях одноосного нагружения; Прикладная механика и техническая физика; Т. 52, № 3 (301)
מאת: Миколайчук М. А. Михаил Александрович
יצא לאור: (2010)
מאת: Миколайчук М. А. Михаил Александрович
יצא לאור: (2010)
Combined action of crack closure and residual stress under periodic overloads: A fractographic analysis; International Journal of Fatigue; Vol. 82, pt. 3
יצא לאור: (2016)
יצא לאור: (2016)
Study of the Influence of Uniaxial Strain and Electron Irradiation on the Deformation of Polytetrafluoroethylene Film; Key Engineering Materials; Vol. 781 : Radiation-Thermal Effects and Processes in Inorganic Materials
יצא לאור: (2018)
יצא לאור: (2018)
Synergy of crack closure, near-tip residual stress and crack-tip blunting in crack growth under periodic overloads – A fractographic study; International Journal of Fatigue; Vol. 93, pt. 1
יצא לאור: (2016)
יצא לאור: (2016)
Multiscale Fracture of Ti-Al-N Coatings under Uniaxial Tension; Physical Mesomechanics; Vol. 24, iss. 2
יצא לאור: (2021)
יצא לאור: (2021)
Diffusion and Stress Interrelation in the Transition Zone between a Particle and a Matrix in Composite Synthesis; Physics of the Solid State; Vol. 65, iss. 10
מאת: Knyazeva A. G. Anna Georgievna
יצא לאור: (2022)
מאת: Knyazeva A. G. Anna Georgievna
יצא לאור: (2022)
Effect of local curvature of the coating-substrate interface on deformation and fracture of ceramic coatings under uniaxial tension; Physical Mesomechanics; Vol. 20, iss. 4
מאת: Shugurov A. R. Artur Rubinovich
יצא לאור: (2017)
מאת: Shugurov A. R. Artur Rubinovich
יצא לאור: (2017)
The role of notch tip shape and radius on deformation mechanisms of 12Cr1MoV steel under impact loading. Part 2. Influence of strain localization on fracture and numeric simulations; Fatigue and Fracture of Engineering Materials and Structures; Vol. 40, iss. 11
יצא לאור: (2017)
יצא לאור: (2017)
Diagnostics of Fibre-Reinforced Concrete by the Nondestructive Method Based on Mechanoelectric Transformations Phenomenon; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
מאת: Petrov M. V. Maksim Vyacheslavovich
יצא לאור: (2019)
מאת: Petrov M. V. Maksim Vyacheslavovich
יצא לאור: (2019)
Study of a Methodology for Calculating Contact Stresses during Blade Processing of Structural Steel; Metals; Vol. 13, iss. 12
יצא לאור: (2023)
יצא לאור: (2023)
Simulation of stressed -deformed state of the plate invoked by changing regime of external heating and solid-phase chemical conversion; Известия вузов. Физика; Т. 57, № 12-2
מאת: Chumakov Yu. A. Yuri Aleksandrovich
יצא לאור: (2015)
מאת: Chumakov Yu. A. Yuri Aleksandrovich
יצא לאור: (2015)
Calculation of Stress-Strain State and Contact Stresses in the Process of Chip Formation; Solid State Phenomena; Vol. 313
מאת: Proskokov A. V. Andrey Vladimirovich
יצא לאור: (2021)
מאת: Proskokov A. V. Andrey Vladimirovich
יצא לאור: (2021)
New phase growth in the vicinity of a spherical particle interacting with a matrix with regard mechanical stresses induced by diffusion; International Communications in Heat and Mass Transfer; Vol. 142
מאת: Anisimova M. A. Mariya Aleksandrovna
יצא לאור: (2023)
מאת: Anisimova M. A. Mariya Aleksandrovna
יצא לאור: (2023)
Модель диффузии примеси в структурно-неоднородной деформируемой среде; Известия вузов. Физика; Т. 55, № 5-2
מאת: Миколайчук М. А. Михаил Александрович
יצא לאור: (2012)
מאת: Миколайчук М. А. Михаил Александрович
יצא לאור: (2012)
Effect of surface activation and internal mechanical stress on the diffusion of oxygen atoms in TiNi alloys in electron beam treatment; Physical Mesomechanics; Vol. 14, iss. 1-2
מאת: Knyazeva A. G. Anna Georgievna
יצא לאור: (2011)
מאת: Knyazeva A. G. Anna Georgievna
יצא לאור: (2011)
Прочность конструкционных пластмасс
מאת: Гольдман А. Я. Анатолий Яковлевич
יצא לאור: (Ленинград, Машиностроение, 1979)
מאת: Гольдман А. Я. Анатолий Яковлевич
יצא לאור: (Ленинград, Машиностроение, 1979)
Influence of generation mechanisms on pulse profile of mechanical stress in metal target under the action of power ion beams; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 2
יצא לאור: (2007)
יצא לאור: (2007)
Research of Contact Stresses Distribution on Plunge-Cutting into a Steel Workpiece; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
יצא לאור: (2018)
יצא לאור: (2018)
Advanced Protocols in Oxidative Stress III
יצא לאור: (2015)
יצא לאור: (2015)
Evaluation of Damage in Concrete Under Uniaxial Compression by Measuring Electric Response to Mechanical Impact; Journal of Nondestructive Evaluation; Vol. 36, iss. 2
יצא לאור: (2017)
יצא לאור: (2017)
Plant Stress Tolerance Methods and Protocols /
יצא לאור: (2024)
יצא לאור: (2024)
Solid-phase combustion in a plane stress state. 1. Stationary combustion wave; Journal of Applied Mechanics and Technical Physics; Vol. 51, iss. 2
מאת: Knyazeva A. G. Anna Georgievna
יצא לאור: (2010)
מאת: Knyazeva A. G. Anna Georgievna
יצא לאור: (2010)
Calculation of Contact Stresses during Titanium Alloy Cutting; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
יצא לאור: (2018)
יצא לאור: (2018)
Advanced Protocols in Oxidative Stress I
יצא לאור: (2008)
יצא לאור: (2008)
Оценка параметров разрушающей нагрузки при ударно-волновом нагружении для ответственных строительных конструкций сооружений нефтегазового комплекса; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 328, № 3
מאת: Однокопылов Г. И. Георгий Иванович
יצא לאור: (2017)
מאת: Однокопылов Г. И. Георгий Иванович
יצא לאור: (2017)
The Integrated Stress Response Methods and Protocols /
יצא לאור: (2022)
יצא לאור: (2022)
Advanced Protocols in Oxidative Stress II
יצא לאור: (2010)
יצא לאור: (2010)
Strain Localization of Commercially Pure Titanium Subjected to Ultrasonic Impact Treatment Followed by Uniaxial Tension; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
יצא לאור: (2016)
יצא לאור: (2016)
Investigation of initiation conditions of relative displacements of the fault-block media units under vibration loading; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 2
מאת: Astafurov S. V.
יצא לאור: (2007)
מאת: Astafurov S. V.
יצא לאור: (2007)
Interrelations between heat and mechanical processes during solid phase chemical conversion under loading; Procedia Computer Science; Vol. 1, iss. 1
מאת: Knyazeva A. G. Anna Georgievna
יצא לאור: (2010)
מאת: Knyazeva A. G. Anna Georgievna
יצא לאור: (2010)
Multiscale Surface Roughening of Commercial Purity Titanium during Uniaxial Tension; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
יצא לאור: (2015)
יצא לאור: (2015)
Load-bearing of axle-box assemblies; Journal of Economics and Social Sciences; № 16
מאת: Cheremiskina M. S. Maria Sergeevna
יצא לאור: (2020)
מאת: Cheremiskina M. S. Maria Sergeevna
יצא לאור: (2020)
The mathematical model of the initial stage of surface treatment with particle flux; Energy Fluxes and Radiation Effects (EFRE-2016)
מאת: Parfenova E. S. Elena Sergeevna
יצא לאור: (2016)
מאת: Parfenova E. S. Elena Sergeevna
יצא לאור: (2016)
Закономерности ползучести и длительной прочности: справочник
יצא לאור: (Москва, Машиностроение, 1983)
יצא לאור: (Москва, Машиностроение, 1983)
The Mathematical Modeling of the Initial Stage of Ion Implantation into the Target with Coating; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
מאת: Parfenova E. S. Elena Sergeevna
יצא לאור: (2017)
מאת: Parfenova E. S. Elena Sergeevna
יצא לאור: (2017)
פריטים דומים
-
Strain-Induced Surface Roughening in Polycrystalline VT1-0 Titanium Specimens under Uniaxial Tension; Physical Mesomechanics; Vol. 21, iss. 3
יצא לאור: (2018) -
Uniaxial Stress and Electron Irradiation Effects on Nanochains Straightening in Film Polymer Materials; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
יצא לאור: (2018) -
Micromechanical model of deformation-induced surface roughening in polycrystalline materials; Physical Mesomechanics; Vol. 20, iss. 3
יצא לאור: (2017) -
Evaluation of the Influence of the Location Solid-State Inclusions on the Amplitude-Frequency Characteristics under Pulsed Acoustic Excitation in the Process of Uniaxial Compression; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
מאת: Dann D. D. Denis Dmitrievich
יצא לאור: (2019) -
Relation between damage processes of reinforced concrete under uniaxial compression and electric response to pulsed mechanical impact; Procedia Structural Integrity; Vol. 10 : 1st International Conference of the Greek Society of Experimental Mechanics of Materials,Athens, May 10-12, 2018
מאת: Petrov M. V. Maksim Vyacheslavovich
יצא לאור: (2018)