A high-repetition rate pulsed electron accelerator
| Parent link: | IEEE Transactions on Dielectrics and Electrical Insulation.— , 2013 Vol. 20, iss. 4.— 2013.— [P. 1334-1339] |
|---|---|
| Údar corparáideach: | |
| Rannpháirtithe: | , , , , , |
| Achoimre: | Title screen A new electron beam accelerator with beam ejection into the atmosphere has been recently developed for radiation technology application. The high-voltage nanosecond pulse generator of the accelerator is based on a low-inductance pulse transformer. A cold cathode thyratron is used as a primary switcher. The diode consists of a cathode, which provides a high delay time in the plasma formation. The electron beam current pulse duration at half height is 75 ns. The kinetic energy of the electron beam is 450 keV. A cooling system is used for the anode, which makes it possible to extract an electron beam with the current density of 12 A/cm2 into the atmosphere. The accelerator is capable to operate in a long-term-repetition rate producing up to 40 pulses per second, which is possible due to the use of a built-in system of regeneration and cooling of the transformer oil. The results of shot-to-shot variation of the beam parameters in the repetitive mode are presented. Режим доступа: по договору с организацией-держателем ресурса |
| Teanga: | Béarla |
| Foilsithe / Cruthaithe: |
2013
|
| Ábhair: | |
| Rochtain ar líne: | https://doi.org/10.1109/TDEI.2013.6571453 |
| Formáid: | Leictreonach Caibidil leabhair |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=637689 |
| Achoimre: | Title screen A new electron beam accelerator with beam ejection into the atmosphere has been recently developed for radiation technology application. The high-voltage nanosecond pulse generator of the accelerator is based on a low-inductance pulse transformer. A cold cathode thyratron is used as a primary switcher. The diode consists of a cathode, which provides a high delay time in the plasma formation. The electron beam current pulse duration at half height is 75 ns. The kinetic energy of the electron beam is 450 keV. A cooling system is used for the anode, which makes it possible to extract an electron beam with the current density of 12 A/cm2 into the atmosphere. The accelerator is capable to operate in a long-term-repetition rate producing up to 40 pulses per second, which is possible due to the use of a built-in system of regeneration and cooling of the transformer oil. The results of shot-to-shot variation of the beam parameters in the repetitive mode are presented. Режим доступа: по договору с организацией-держателем ресурса |
|---|---|
| DOI: | 10.1109/TDEI.2013.6571453 |