Structure and abrasive wear resistance of R6M5 steel-tungsten carbide composite coatings; Technical Physics Letters; Vol. 38, iss. 9

Structure and abrasive wear resistance of R6M5 steel-tungsten carbide composite coatings; Technical Physics Letters; Vol. 38, iss. 9

Մատենագիտական մանրամասներ
Parent link:	Technical Physics Letters: Scientific Journal Vol. 38, iss. 9.— 2012.— [P. 861-864]
Հիմնական հեղինակ:	Gnyusov S. F. Sergey Fedorovich
Համատեղ հեղինակ:	Национальный исследовательский Томский политехнический университет (ТПУ) Институт физики высоких технологий (ИФВТ) Кафедра физики высоких технологий в машиностроении (ФВТМ)
Ամփոփում:	Title screen Features of the structure formation, composition, and abrasive wear resistance of R6M5 steel-tungsten carbide (R6M5-WC) composite coatings have been studied as dependent on the WC content. The introduction of 20 wt % WC into the hardening composition leads to an increase in the fraction of M6C carbide (in the form of eutectic inclusions with average size 5.9 ?m at grain boundaries and dispersed 0.25 m particles in the volume of grains), while a large proportion of metastable austenite (88 vol %) is still retained. Режим доступа: по договору с организацией-держателем ресурса
Լեզու:	անգլերեն
Հրապարակվել է:	2012
Խորագրեր:	электронный ресурс труды учёных ТПУ износостойкость композитные покрятия
Առցանց հասանելիություն:	http://dx.doi.org/10.1134/S1063785012090210
Ձևաչափ:	Էլեկտրոնային Գրքի գլուխ
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=636197

Նմանատիպ նյութեր

Structure and wear resistance of R6M5 steel based coatings; Technical Physics Letters; Vol. 36, iss. 8
‌: Gnyusov S. F. Sergey Fedorovich
Հրապարակվել է: (2010)

Structure and abrasive wear of composite HSS M2/WC coating; Advances in Tribology; Vol. 2012
‌: Gnyusov S. F. Sergey Fedorovich
Հրապարակվել է: (2012)

The microstructural aspects of abrasive wear resistance in composite electron beam clad coatings; Applied Surface Science; Vol. 293
‌: Gnyusov S. F. Sergey Fedorovich
Հրապարակվել է: (2014)

Structural phase states and heat aging of composite electron-beam clad coatings; Surface and Coatings Technology; Vol. 232
‌: Gnyusov S. F. Sergey Fedorovich
Հրապարակվել է: (2013)

Structure and abrasive wear resistance of electron-beam carbon-nitrogen coatings; Metal Science and Heat Treatment; Vol. 50, iss. 5
‌: Narkevich N. A.
Հրապարակվել է: (2008)

The effect of counterbody on tribological adaptation of an electron beam deposited HSS M2 steel coating in a range of sliding speeds and normal loads; Tribology International; Vol. 161
‌: Gnyusov S. F. Sergey Fedorovich
Հրապարակվել է: (2021)

Wear of steel with ultrasound-induced nanostructuring of the surface layer. Part 1. Mechanical properties and wear resistance; Steel in Translation; Vol. 43, iss. 4
Հրապարակվել է: (2013)

The effect of thermal cycling by electron-beam surfacing on structure and wear resistance of deposited M2 steel; Applied Surface Science; Vol. 263
Հրապարակվել է: (2012)

Tribological properties of alloyed TiSi-stainless steel carbide coatings deposited by reactive cathodic arc method; Wear; Vol. 460-461
Հրապարակվել է: (2020)

Hardness and Abrasive Wear Resistance of Electron Beam Coatings Cladded by Using of "TiB-Titanium Matrix" Composite Powders; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Հրապարակվել է: (2018)

Формообразование большепролетных покрытий в архитектуре
‌: Михайленко В. Е. Всеволод Евдокимович
Հրապարակվել է: (Киев, Вища школа, 1987)

Research of wear resistance of polycrystalline diamond coatings on hard alloys based on WC-Co; Современные материалы и технологии новых поколений
‌: Khalafov R. D.
Հրապարակվել է: (2019)

Wear resistance of composites based on hybrid UHMWPE–PTFE matrix: Mechanical and tribotechnical properties of the matrix; Journal of Friction and Wear; Vol. 36, iss. 3
Հրապարակվել է: (2015)

Integrated Quality Ensuring Technique of Plasma Wear Resistant Coatings; Key Engineering Materials; Vol. 736 : Materials and their Application
Հրապարակվել է: (2017)

Wear resistance of composites based on ultrahigh molecular weight polyethylene filled with graphite and molybdenum disulfide microparticles; Journal of Friction and Wear; Vol. 35, iss. 4
Հրապարակվել է: (2014)

The Effect of Cu–Mo–S Coatings on Wear Resistance of Copper Friction Pair; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Հրապարակվել է: (2016)

Wear of 110G13 steel with ultrasound-induced nanostructuring of the surface layer part 2. Structural research; Steel in Translation; Vol. 43, iss. 8
Հրապարակվել է: (2013)

Role of Micro- and Nanofillers in Abrasive Wear of Composites Based on Ultra-High Molecular Weight Polyethylene; Advanced Materials Research; Vol. 1040 : High Technology: Research and Applications 2014 (HTRA 2014)
Հրապարակվել է: (2014)

Structure of coating based on 10R6M5-steel after wearing in friction pair; Journal of Economics and Social Sciences; № 16
‌: Fedin E. A. Evgeniy
Հրապարակվել է: (2020)

Wear of ceramic and ceramic–metal composites in high-speed dry sliding over steel; Powder Metallurgy and Metal Ceramics; Vol. 48, iss. 1-2
‌: Kulkov S. N. Sergey Nikolaevich
Հրապարակվել է: (2009)

Increasing wear resistance of bulk uhmw-pe based composite materials by mechanical activation and adding of plasticizer; Современные проблемы машиностроения
Հրապարակվել է: (2008)

Structural-phase states and wear resistance of surface formed on steel by surfacing; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
Հրապարակվել է: (2014)

Methods of Forecasting Wear Resistance of Cutting Tools Based on the Properties of their Materials; Applied Mechanics and Materials; Vol. 682 : Innovation Technology and Economics in Engineering
‌: Bibik V. L. Vladislav Leonidovich
Հրապարակվել է: (2014)

Получение композиционных порошков Al2O3 - MgO методом распылительной сушки; Функциональные материалы: разработка, исследование, применение
‌: Горячев М. О.
Հրապարակվել է: (2017)

Improvement of the Wear Resistance of Electroplated Au-Ni Coatings by Zr Ion Bombardment of Ni-B Sublayer; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Հրապարակվել է: (2015)

Structure and wear resistance of plasma coatings sputtered using TiC+ HSS binder composite powder; Inorganic Materials: Applied Research; Vol. 9, iss. 3
Հրապարակվել է: (2018)

Improvement of Wear Resistance of UHMWPE by Adding Solid Lubricating Fillers; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Հրապարակվել է: (2016)

Mechanical Wear Fundamentals and Testing
‌: Bayer R. G. Raymond G.
Հրապարակվել է: (New York, Marcel Dekker, 2004)

Increasing Wear Resistance of Copper Friction Pair with Electrically-Conductive Tribological Cu-Mo-S Coatings; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Հրապարակվել է: (2016)

Wear resistance of steels under conditions of dry sliding friction and electric current of high density; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
Հրապարակվել է: (2014)

Electron Beam Cladding by HSS R6M5 Powder; IEEE Transactions on Plasma Science; Vol. 41, iss. 8
‌: Gnyusov S. F. Sergey Fedorovich
Հրապարակվել է: (2013)

Electron beam surfacing of carbide steels1. Special features of surfacing technology and preparation ofcomposite surfacing mixtures; Welding International; Vol. 22, iss. 11
‌: Gnyusov S. F. Sergey Fedorovich
Հրապարակվել է: (2008)

Wear resistance of the surface layers of hard alloys with a multilevel structural phase state; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 10, iss. 4
Հրապարակվել է: (2016)

Microstructure and Wear Resistance of Surface Layer of Copper Modified by N+ Ion High Fluencies Implantation; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
Հրապարակվել է: (2015)

Effect of grain size and amount of zirconia on the physical and mechanical properties and the wear resistance of zirconia-toughened alumina; Ceramics International; Vol. 46, iss. 7
Հրապարակվել է: (2020)

Wear Resistance of Friction Pair of Metal Composite/Copper under Electric Current; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Հրապարակվել է: (2016)

Structure and wear resistance of electron-beam nitrous coatings; Journal of Friction and Wear; Vol. 33, iss. 5
Հրապարակվել է: (2012)

The relation between the inductive capacity of an oxide surface structure of hard alloys and their wear resistance; IOP Conference Series: Materials Science and Engineering; Vol. 511 : Perspective Materials of Constructional and Medical Purpose
Հրապարակվել է: (2019)

Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene; AIP Conference Proceedings; Vol. 1915 : Mechanics, Resource and Diagnostics of Materials and Structures (MRDMS-2017)
Հրապարակվել է: (2017)

Diffusion-Controlled Wear of Steel Friction Stir Welding Tools Used on Aluminum Alloys; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Հրապարակվել է: (2015)