Получение градиентных композитов из прекерамических бумаг на основе МАХ-фазы TI3SIC2; Перспективы развития фундаментальных наук; Т. 1 : Физика
| Parent link: | Перспективы развития фундаментальных наук=Prospects of Fundamental Sciences Development: сборник научных трудов XVIII Международной конференции студентов, аспирантов и молодых ученых, г. Томск, 27-30 апреля 2021 г./ Национальный исследовательский Томский политехнический университет (ТПУ) ; под ред. И. А. Курзиной, Г. А. Вороновой.— , 2021 Т. 1 : Физика.— 2021.— [С. 229-231] |
|---|---|
| Autor principal: | |
| Autor Corporativo: | |
| Outros Autores: | , |
| Resumo: | Заглавие с экрана This article is devoted to fabrication of gradient Ti3SiC2-based composites using preceramic papers as a feedstock. The initial raw material is a stack of preceramic paper with a powder filler Ti3SiC2, the content of which varies from 60 to 90% every three layers. The composites were obtained by spark plasma sintering (SPS) method at 10 MPa pressure for 10 min holding time. The sintering temperature was 1523 K. The microstructure and phase composition of the obtained gradient composites were analyzed. |
| Idioma: | russo |
| Publicado em: |
2021
|
| Assuntos: | |
| Acesso em linha: | http://earchive.tpu.ru/handle/11683/68236 |
| Formato: | Recurso Electrónico Capítulo de Livro |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=633420 |
| Resumo: | Заглавие с экрана This article is devoted to fabrication of gradient Ti3SiC2-based composites using preceramic papers as a feedstock. The initial raw material is a stack of preceramic paper with a powder filler Ti3SiC2, the content of which varies from 60 to 90% every three layers. The composites were obtained by spark plasma sintering (SPS) method at 10 MPa pressure for 10 min holding time. The sintering temperature was 1523 K. The microstructure and phase composition of the obtained gradient composites were analyzed. |
|---|