Friction reduction by nanometal additives to mineral oil
| Parent link: | Tribologia : tarcie, zuzycie, smarowanie.— , 1981- № 6.— 2002.— S. 1683-1690 |
|---|---|
| Main Author: | Tarasov S. Yu. Sergei Yulievich |
| Other Authors: | Kolubaev A., Belyaev S. |
| Summary: | Friction and wear tests of metal nanopowder additives to mineral oil for lubricating steel-steel pair have been carried out. The copper, zinc and brass nanopowders have been produced by electric explosion of metallic wires. In spite of absence of selective transfer wear mode, it was noted the reduction in friction and wear especially at high sliding speed and load. World tribology practice shows that metal-containing additives to the lubricants might enhance both life and reliability of machine parts. Most of all this refers to formation of thin antiwear films of the rubbing surfaces, Soft films formed from chemical elements of the additive formulation are easy to deform under contact load and thus reduce the tangent stresses in the base material, which in turn enhances friction and wear characteristics of a unit. However, it could happen that no such anti-wear films are formed during friction but both friction and wear are reduced. Furthermore, such an additive contributes to reducing adhesion between contacting bodies by modifying transfer layer formed between them. Another aspect is that deformation in friction occurs at different scale levels and it was shown [L. 1] that a crossover from normal oxidation wear to catastrophic (adhesion and seizure) is characterized by a sharp growth in the size of structural units involved in wear. In connection with this, modification of wear surfaces as well as transfer layer to keep the number of adhesion bonds below its critical value is also very important. We have studied effect of metallic nanopowdcr additives (copper, brass and zinc) made by electric explosion of wires to mineral oil on friction and wear of steel-to-steel friction couples in a wide range of loads and friction speeds. В фонде НТБ ТПУ отсутствует |
| Language: | English |
| Published: |
2002
|
| Subjects: | |
| Format: | Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=599669 |
Similar Items
Study of friction reduction by nanocopper additives to motor oil; Wear; Vol. 252, iss. 1-2
Published: (2002)
Published: (2002)
Localization of strain in friction; Metal Science and Heat Treatment; Vol. 48, iss. 5-6
by: Tarasov S. Yu. Sergei Yulievich
Published: (2006)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2006)
Application of fractals to the analysis of friction processes; Technical Physics Letters; Vol. 25, iss. 2
by: Tarasov S. Yu. Sergei Yulievich
Published: (1999)
by: Tarasov S. Yu. Sergei Yulievich
Published: (1999)
Friction-Burnishing Treatment of Medium-Carbon Steel; Metal Science and Heat Treatment; Vol. 57, iss. 5
by: Tarasov S. Yu. Sergei Yulievich
Published: (2015)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2015)
Shear instability in the subsurface layer of a material in friction; Physics of the Solid State; Vol. 53, iss. 2
by: Tarasov S. Yu. Sergei Yulievich
Published: (2011)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2011)
Structure in surface frictional layers on 36NKhTYu alloy; Soviet Physics Journal; Vol. 34, iss. 8
by: Tarasov S. Yu. Sergei Yulievich
Published: (1991)
by: Tarasov S. Yu. Sergei Yulievich
Published: (1991)
Friction stir processing on carbon steel; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
by: Tarasov S. Yu. Sergei Yulievich
Published: (2014)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2014)
Effect of friction on subsurface layer microstructure in austenitic and martensitic steels; Wear; Vol. 231, iss. 2
by: Tarasov S. Yu. Sergei Yulievich
Published: (1999)
by: Tarasov S. Yu. Sergei Yulievich
Published: (1999)
Friction stir processing on high carbon steel U12; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
by: Tarasov S. Yu. Sergei Yulievich
Published: (2015)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2015)
Friction Stir Processing on High Carbon Steel U12; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
by: Tarasov S. Yu. Sergei Yulievich
Published: (2015)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2015)
Radiographic detection of defects in friction stir welding on aluminum alloy AMg5M; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
by: Tarasov S. Yu. Sergei Yulievich
Published: (2014)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2014)
Formation of surface layer with nanosize grain-subgrain structure due to friction of a copper - tool steel pair; Metal Science and Heat Treatment; Vol. 52, iss. 3-4
by: Tarasov S. Yu. Sergei Yulievich
Published: (2010)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2010)
The effect of friction stir welding tool wear on the weld quality of aluminum alloy AMg5M; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
by: Tarasov S. Yu. Sergei Yulievich
Published: (2014)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2014)
Effect of Nanometal Additives on The Ignition of Al -Based Energetic Materials; Nano and Micro‐Scale Energetic Materials: Propellants and Explosives
Published: (2023)
Published: (2023)
Electroexplosive Nanometals; Metal Nanopowders: Production, Characterization, and Energetic Applications
Published: (2014)
Published: (2014)
Reduction of friction by normal oscillations. I. Influence of contact stiffness; Friction; Vol. 5, iss. 1
by: Popov M. Mikhail
Published: (2017)
by: Popov M. Mikhail
Published: (2017)
Alloying contact zones by metallic nanopowders in sliding wear; Wear; Vol. 257, iss. 5-6
by: Tarasov S. Yu. Sergei Yulievich
Published: (2004)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2004)
Mild-to-severe wear transition and plastic strain localization; Annals of faculty engineering hunedoara; T. 6, № 2
by: Tarasov S. Yu. Sergei Yulievich
Published: (2008)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2008)
Corrigendum to "Subsurface shear instability and nanostructuring of metals in sliding" [Wear 268 (2010) 59–66]; Wear; Vol. 268
by: Tarasov S. Yu. Sergei Yulievich
Published: (2010)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2010)
Wear resistance of structural steel in lubricants bearing metal nanopowders; Metal Science and Heat Treatment; Vol. 47, iss. 11-12
by: Tarasov S. Yu. Sergei Yulievich
Published: (2005)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2005)
Generation of shear bands in subsurface layers of metals in sliding; Physics of the Solid State; Vol. 50, iss. 5
by: Tarasov S. Yu. Sergei Yulievich
Published: (2008)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2008)
Flow wear by shear instability in sliding; Acta technica corviniensis; T. 5, №3
by: Tarasov S. Yu. Sergei Yulievich
Published: (2012)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2012)
Investigation of the depressor additive effect on the pour point of synthetic and mineral compressor oil; Химия и химическая технология в XXI веке; Т. 2
by: Saprygina A. V.
Published: (2023)
by: Saprygina A. V.
Published: (2023)
Minkowski functionals and fractography of aluminum alloys; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
by: Tarasov S. Yu. Sergei Yulievich
Published: (2016)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2016)
Minkowski Functionals and Fractography of Aluminum Alloys; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
by: Tarasov S. Yu. Sergei Yulievich
Published: (2016)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2016)
Orientation dependence of subsurface deformation in dry sliding wear of Cu single crystals; Applied Surface Science; Vol. 274
by: Tarasov S. Yu. Sergei Yulievich
Published: (2013)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2013)
Subsurface shear instability and nanostructuring of metals in sliding; Wear; Vol. 268, iss. 1-2
by: Tarasov S. Yu. Sergei Yulievich
Published: (2010)
by: Tarasov S. Yu. Sergei Yulievich
Published: (2010)
Nanometals: Synthesis and Application in Energetic Systems; Chapter Three; Energetic Nanomaterials: Synthesis, Characterization, and Application
Published: (2016)
Published: (2016)
Laboratory Evaluation of the Drag Reduction Additives Effectiveness; Procedia Chemistry; Vol. 15 : Chemistry and Chemical Engineering in XXI century (CCE 2015)
Published: (2015)
Published: (2015)
Quantum Effects Under Migratory Polarization in Nanometer Layers of Proton Semiconductors and Dielectrics at Ultralow Temperatures; Russian Physics Journal; Vol. 58, iss. 1
by: Annenkov Yu. M. Yuriy Mikhailovich
Published: (2015)
by: Annenkov Yu. M. Yuriy Mikhailovich
Published: (2015)
Method of dimensionality reduction in contact mechanics and friction: a user’s handbook. Iii. Viscoelastic contacts; Facta Universitatis. Series: Mechanical Engineering; Vol. 16, iss. 2
by: Popov V. L. Valentin Leonidovich
Published: (2018)
by: Popov V. L. Valentin Leonidovich
Published: (2018)
The influence of succinimide additives on high-oil compositions; Проблемы геологии и освоения недр; Т. 2
by: Pham Tien Thang
Published: ()
by: Pham Tien Thang
Published: ()
Additives to Coal-Based Fuel Pellets for the Intensification of Combustion and Reduction in Anthropogenic Gas Emissions; Applied Sciences; Vol. 10, iss. 19
Published: (2020)
Published: (2020)
Anti-turbulent additives to oil and petroleum products; Химия и химическая технология в XXI веке; Т. 2
by: Menshov P. V.
Published: (2015)
by: Menshov P. V.
Published: (2015)
The Modification of Natural Minerals; Modern Technique and Technologies. MTT'2003
by: Godymchuk (Godimchuk) A. Yu. Anna Yuryevna
Published: (2003)
by: Godymchuk (Godimchuk) A. Yu. Anna Yuryevna
Published: (2003)
Additional Energy Losses from Asymmetric and Non-Sinusoidal Current in an Electrical Facility and Methods of their Reduction; MATEC Web of Conferences; Vol. 37 : Smart Grids 2015
Published: (2015)
Published: (2015)
Gravity and Magnetic Methods in Mineral and Oil & Gas Exploration and Production
by: Li Y. Yaoguo
Published: (Houten, EAGE, 2015)
by: Li Y. Yaoguo
Published: (Houten, EAGE, 2015)
Effects of additives on low temperature properties of motor oils; Химия и химическая технология в XXI веке; Т. 2
by: Murtala H. A.
Published: (2025)
by: Murtala H. A.
Published: (2025)
Impact of an elastic sphere with an elastic half space with a constant coefficient of friction: Numerical analysis based on the method of dimensionality reduction; ZAMM - Journal of Applied Mathematics and Mechanics; Vol. 96, iss. 6
by: Willert E. Emanuel
Published: (2016)
by: Willert E. Emanuel
Published: (2016)
Friction welding; Неразрушающий контроль; Т. 3
by: Nikiforov D. S.
Published: ()
by: Nikiforov D. S.
Published: ()
Similar Items
-
Study of friction reduction by nanocopper additives to motor oil; Wear; Vol. 252, iss. 1-2
Published: (2002) -
Localization of strain in friction; Metal Science and Heat Treatment; Vol. 48, iss. 5-6
by: Tarasov S. Yu. Sergei Yulievich
Published: (2006) -
Application of fractals to the analysis of friction processes; Technical Physics Letters; Vol. 25, iss. 2
by: Tarasov S. Yu. Sergei Yulievich
Published: (1999) -
Friction-Burnishing Treatment of Medium-Carbon Steel; Metal Science and Heat Treatment; Vol. 57, iss. 5
by: Tarasov S. Yu. Sergei Yulievich
Published: (2015) -
Shear instability in the subsurface layer of a material in friction; Physics of the Solid State; Vol. 53, iss. 2
by: Tarasov S. Yu. Sergei Yulievich
Published: (2011)