Coating deposition using vacuum arc and ablation metal plasma; Surface and Coatings Technology; Vol. 203, № 17-18
| Parent link: | Surface and Coatings Technology.— , 2004- Vol. 203, № 17-18.— 2009.— P. 2735-2738 |
|---|---|
| প্রধান লেখক: | |
| অন্যান্য লেখক: | , |
| সংক্ষিপ্ত: | An innovative concept in the development of advanced coating deposition and ion implantation method including an application of filtered DC metal plasma or ablation plasma and high-frequency short-pulsed negative bias voltage with a duty factor in the range 10-99% is considered. The regularities of metal ion implantation and vacuum arc metal plasma or ablation plasma deposition for conducting and insulating materials are considered. It was shown that plasma based ion implantation as well as high-concentration plasma ion implantation with compensation of ion surface sputtering by plasma deposition as well as ion-assisted coating deposition may be realized for metal and dielectric samples by variation of negative bias potential in the range of 0-4·103 V, pulse repetition rate smoothly adjusted in the range of (2-4.4) × 105 pps and pulse duration in the range of 0.5-2 μs. It was experimentally shown that at coating deposition from ablation plasma obtained by high intensity ion beam (j = 300 A/cm2, E = 350 keV, τ = 90 ns) influence on the target, the breakdown of the plasma sheet occurred at dc negative bias potential on a substrate more than 60 V. The transfer to 0.5 μs duration pulses allowed us to increase the bias potential up to - 4 kV. The possibility of high-frequency, short-pulsed plasma-immersion ion implantation and deposition method application for coating deposition from vacuum arc and ablation plasma with high adhesive strength and improved exploitation characteristics is discussed in the paper. В фонде НТБ ТПУ отсутствует |
| ভাষা: | ইংরেজি |
| প্রকাশিত: |
2009
|
| বিষয়গুলি: | |
| বিন্যাস: | গ্রন্থের অধ্যায় |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=599627 |
অনুরূপ উপাদানগুলি
Coating deposition using vacuum arc and ablation metal plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: ()
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: ()
Investigation of microdefects transformation on the coatings surface during vacuum-arc plasma deposition; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2010)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2010)
Equipment and methods for hybrid technologies of ion beam and plasma surface materials modification; Surface and Coatings Technology; Vol. 203, № 17-18
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2009)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2009)
High-Frequensy Short-Pulsed Metal Plasma-Immersion Ion Implantion Or Deposition Using Filtered DC Vacuum-ARC Plasma; Surface and Coatings Technology; Vol. 201, № 15
প্রকাশিত: (2007)
প্রকাশিত: (2007)
Investigation of filtered vacuum arc plasma application for TiAlN and TiSiB coatings deposition using ion beam and plasma material processing; Surface and Coatings Technology; Vol. 296
প্রকাশিত: (2016)
প্রকাশিত: (2016)
High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma (Part I); 7 International conference on modification of materials with particle beams and plasma flows
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2004)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2004)
High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma (Part II); 7 International conference on modification of materials with particle beams and plasma flows
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2004)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2004)
Superhard nanocrystalline Ti-Cu-N coatings deposited by vacuum arc evaporation of a sintered cathode; Surface and Coatings Technology; Vol. 207
প্রকাশিত: (2012)
প্রকাশিত: (2012)
Hardening the surface of metals with WC1-x coatings deposited by high-speed plasma spraying; Surface and Coatings Technology; Vol. 389
প্রকাশিত: (2020)
প্রকাশিত: (2020)
The Formation of Composite Ti-Al-N Coatings Using Filtered Vacuum Arc Deposition with Separate Cathodes; Metals; Vol. 7, iss. 11
প্রকাশিত: (2017)
প্রকাশিত: (2017)
Aluminium vacuum arc plasma application for intermetallic layers formation using plasma immersion ion implantation method; Известия вузов. Физика; Т. 57, № 12/3
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2014)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2014)
Vacuum arc filtered metal plasma application in hybrid technologies of ion-beam and plasma material processing; Surface and Coatings Technology; Vol. 201, № 19-20
প্রকাশিত: (2007)
প্রকাশিত: (2007)
Arc plasma-assisted deposition of nanocrystalline coatings; 25th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)
প্রকাশিত: (2012)
প্রকাশিত: (2012)
High-frequency short-pulsed metal plasma-immersion ion implantation using filtered DC vacuum-arc plasma. (Part 2); 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2004)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2004)
High-frequency short-pulsed metal plasma-immersion ion implantation using filtered DC vacuum-arc plasma. (Part 1); 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2004)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2004)
Metal vapor vacuum arc ion sources ''Raduga''; Review of Scientific Instruments; Vol. 65, Iss. 10
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (1994)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (1994)
Physico-mechanical properties of Ti-Zr coatings fabricated via ion-assisted arc-plasma deposition; Vacuum; Vol. 149
প্রকাশিত: (2018)
প্রকাশিত: (2018)
Structure and Properties of CrN/TiN Multi-Layer Coatings Obtained by Vacuum-Arc Plasma-Assisted Deposition Method; Coatings; Vol. 13, iss. 2
প্রকাশিত: (2023)
প্রকাশিত: (2023)
PVD of coatings based on plasma filter application; Korus 2001; Vol. 1
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2001)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2001)
Influence of Bias Parameters and Plasma Density on Vacuum Arc Macroparticle Accumulation; Materials and Manufacturing Processes; Vol. 30, iss. 12
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2015)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2015)
Deposition of copper coatings on internal aluminum contact surfaces by high-energy plasma spraying; Surface and Coatings Technology; Vol. 440
প্রকাশিত: (2022)
প্রকাশিত: (2022)
Metal Coatings Deposition Using Hot Target Magnetrons; Surface Modification of Materials by Ion Beams (SMMIB-2019)
প্রকাশিত: (2019)
প্রকাশিত: (2019)
The ablation of plastics by intense pulsed ion beam; Surface and Coatings Technology; Vol. 384
প্রকাশিত: (2020)
প্রকাশিত: (2020)
Features of copper coatings growth at high-rate deposition using magnetron sputtering systems with a liquid metal target; Surface and Coatings Technology; Vol. 324
প্রকাশিত: (2017)
প্রকাশিত: (2017)
Structure and properties of the wollastonite–calcium phosphate coatings deposited on titanium and titanium–niobium alloy using microarc oxidation method; Surface and Coatings Technology; Vol. 307, pt. C : Electrochemical and Plasma Electrolytic Modification of Metal Surfaces
প্রকাশিত: (2016)
প্রকাশিত: (2016)
Progress in low energy high intensity ion implantation method development; Surface and Coatings Technology; Vol. 388
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2020)
অনুযায়ী: Ryabchikov A. I. Aleksandr Ilyich
প্রকাশিত: (2020)
Deposition of biocompatible coatings from the ablation plasma produced by the irradiation of the hydroxyapatite target with powerful ion beams; Advanced Materials Research; Vol. 872
প্রকাশিত: (2014)
প্রকাশিত: (2014)
Deposition of a TiC/Ti coating with a strong substrate adhesion using a high-speed plasma jet; Surface and Coatings Technology; Vol. 291
প্রকাশিত: (2016)
প্রকাশিত: (2016)
Thermionic Vacuum Arc-A Versatile Technology for Thin Film Deposition and Its Applications; Coatings; Vol. 10, iss. 3
প্রকাশিত: (2020)
প্রকাশিত: (2020)
Structural-phase composition and tribological characteristics of fullerenes containing carbonic coatings obtained using high-power ion beams; Surface and Coatings Technology; Vol. 203, № 17-18
প্রকাশিত: (2009)
প্রকাশিত: (2009)
High-speed thermal plasma deposition of copper coating on aluminum surface with strong substrate adhesion and low transient resistivity; Surface and Coatings Technology; Vol. 292
প্রকাশিত: (2016)
প্রকাশিত: (2016)
Structure and Properties of Silumin Surface after Vacuum Arc Plasma-Assisted Deposition of Coatings Irradiated by Low Energy High Current Pulsed Electron Beam; Russian Physics Journal; Vol. 62, iss. 11
প্রকাশিত: (2020)
প্রকাশিত: (2020)
The effect of plasma torch weaving on microstructural evolution in multiple-pass plasma-transferred arc Fe-Cr-V-Mo-C coating; Surface and Coatings Technology; Vol. 344
অনুযায়ী: Gnyusov S. F. Sergey Fedorovich
প্রকাশিত: (2018)
অনুযায়ী: Gnyusov S. F. Sergey Fedorovich
প্রকাশিত: (2018)
Structural modification in a re-heated bead-overlapping zone of the multiple-pass plasma-transferred arc Fe-Cr-V-Mo-C coating; Surface and Coatings Technology; Vol. 329
অনুযায়ী: Degterev A. S. Aleksandr Sergeevich
প্রকাশিত: (2017)
অনুযায়ী: Degterev A. S. Aleksandr Sergeevich
প্রকাশিত: (2017)
Magnetron deposition of chromium nitride coatings using a hot chromium target: Influence of magnetron power on the deposition rate and elemental composition; Surface and Coatings Technology; Vol. 433
প্রকাশিত: (2022)
প্রকাশিত: (2022)
Comparison of gaseous contamination of thin tungsten and gold coatings deposited from ablated plasma generated by Intense Pulsed Ion Beams; Thin Solid Films; Vol. 758
অনুযায়ী: Ryzhkov V. A. Vladislav Andreevich
প্রকাশিত: (2022)
অনুযায়ী: Ryzhkov V. A. Vladislav Andreevich
প্রকাশিত: (2022)
High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma; 8th International Workshop on Plasma-Based Ion Implantation and Deposition (China, September 18-22, 2005)
প্রকাশিত: (2005)
প্রকাশিত: (2005)
(Ti, Al)N and (Ti, Al)N/TiN multilayer coating deposition using filtered vacuum arc plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
প্রকাশিত: ()
প্রকাশিত: ()
Joint influence of steered vacuum arc and negative repetitively pulsed bias on titanium macroparticles suppression; Surface and Coatings Technology; Vol. 355
প্রকাশিত: (2018)
প্রকাশিত: (2018)
The use of low-temperature plasma in a combined technology for the formation of wear-resistant boron-containing coatings; Surface and Coatings Technology; Vol. 389
প্রকাশিত: (2020)
প্রকাশিত: (2020)