Influence of deposition conditions on characteristics of thin-film coatings obtained using high-power ion beams; Proceedings of the 15th International Conference on High-Power Particle Beams (BEAMS 2004), Saint-Petersburg, July 18-23, 2004

Influence of deposition conditions on characteristics of thin-film coatings obtained using high-power ion beams; Proceedings of the 15th International Conference on High-Power Particle Beams (BEAMS 2004), Saint-Petersburg, July 18-23, 2004

Detaylı Bibliyografya
Parent link:	Proceedings of the 15th International Conference on High-Power Particle Beams (BEAMS 2004), Saint-Petersburg, July 18-23, 2004.— 2005.— P. 643-646
Diğer Yazarlar:	Struts V. K., Matvienko V. M., Ryabchikov A. I. Aleksandr Ilyich, Petrov A. V., Shlapakovski A. S.
Özet:	The films of titanium and carbon deposited onto silicon and -Fe substrates using high-power ion beams were investigated. The adhesion strength and plasticity of coatings obtained at different deposition conditions have been studied. It has been found that the adhesion strength increases with increasing distance between the substrate and ablated target and with decreasing film thickness determined by a number of accelerator shots. Characteristics of different coatings are compared. В фонде НТБ ТПУ отсутствует
Dil:	İngilizce
Baskı/Yayın Bilgisi:	2005
Konular:	труды учёных ТПУ
Materyal Türü:	Kitap Bölümü
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=596760

Benzer Materyaller

Application of high-power ion beams to thin films deposition and stimulating mass transfer of previously implanted dopants in materials; Proceedings of the 15th International Conference on High-Power Particle Beams(BEAMS 2004), Saint-Petersburg, July 18-23, 2004
Baskı/Yayın Bilgisi: (2005)

15th International Conference on High-Power Particle Beams. BEAMS'2004 : St. Petersburg, Russia, July 18-23, 2004: proceedings
Baskı/Yayın Bilgisi: (Saint- Petersburg, [Publishing House Institute of Electrophysical Apparatus], 2005)

Picosecond electron beams and their features: invited paper; Proceedings of the 15th International Conference on High-Power Particle Beams, Saint-Petersburg, july 18-23, 2004
Yazar:: Mesyats G. A. Gennady Andreyevich
Baskı/Yayın Bilgisi: (2005)

Multipurpose generator of high-power nanosecond high-voltage pulses; Proceedings of the 15th International Conference on High-Power Particle Beams, Saint-Petersburg, july 18-23, 2004
Baskı/Yayın Bilgisi: (2005)

Mechanical Properties of Titanium Films Deposited by Pulsed High-Power Ion Beams; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Baskı/Yayın Bilgisi: (2004)

Special features of explosive electron emission of graphite cathode operating in pulsed-periodic regime; Proceedings of the 15th International Conference on High-Power Particle Beams, Saint-Petersburg, july 18-23, 2004
Baskı/Yayın Bilgisi: (2005)

Generation of subnanosecond, gigawatt-range Ka-band electromagnetic pulses by using a compact pulsed electron accelerator; Proceedings of the 15th International Conference on High-Power Particle Beams, Saint-Petersburg, july 18-23, 2004
Baskı/Yayın Bilgisi: (2005)

Dynamics of hydrogen liner formation in the inverse Z-pinch configuration at the MIG generator. First results on the study of the pd reaction; Proceedings of the 15th International Conference on High-Power Particle Beams, Saint-Petersburg, july 18-23, 2004
Baskı/Yayın Bilgisi: (2005)

Influence of Deposition Conditions on Characteristics of Fullerenes Containing Carbonic Coatings Obtained Using High-Power Ion Beams; Известия вузов. Физика; Т. 49, № 8
Baskı/Yayın Bilgisi: (2006)

Mechanical Properties of Titanium Films Deposited by Pulsed High-Power Ion Beams; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (2004)

Mass transfer of an implanted dopant in materials under high-power pulsed Ion beam impact; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Baskı/Yayın Bilgisi: (2004)

Effect of emission increasing at the generation of low-energy submillisecond electron beam in the diode with the plasma cathodel; High Power Particle Beams (BEAMS)
Baskı/Yayın Bilgisi: (2008)

Structural And Phase Composition Of Fullerene Films Deposited By High-Power Ion Beams; Bulletin of the Russian Academy of Sciences. Physics; Vol. 72, № 7
Baskı/Yayın Bilgisi: (2008)

Carbon Film Deposition By Powerful Ion Beams; Surface and Coatings Technology; Vol. 201, № 19-20
Baskı/Yayın Bilgisi: (2007)

Properties of Ti coatings deposited by high-power ion beams; Inorganic Materials: Applied Research; Vol. 3, № 3
Baskı/Yayın Bilgisi: (2012)

Deposition of fullerene films from the ablation plasma generated by high-power ion beams on graphite targets; Bulletin of the Russian Academy of Sciences: Physics; Vol. 72, № 7
Baskı/Yayın Bilgisi: (2008)

Properties of ultra-thin Cu films grown by high power pulsed magnetron sputtering; Thin Solid Films; Vol. 631
Baskı/Yayın Bilgisi: (2017)

Structural-phase composition and tribological characteristics of fullerenes containing carbonic coatings obtained using high-power ion beams; Surface and Coatings Technology; Vol. 203, № 17-18
Baskı/Yayın Bilgisi: (2009)

Structural-phase composition of fullerene films coated by high power beams; Nucleus 2007. Fundamental Problems of Nuclear Physics, Atomic Power Engineering and Nuclear Technologies
Baskı/Yayın Bilgisi: (2007)

13 International symposium on high current electronics: Tomsk, Russia, 25-29 July 2004; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (Tomsk, 2004)

The power characteristics of vortical chambers; Korus 2004; V. 1
Yazar:: Vasilevsky M. V. Mikhail Viktorovich
Baskı/Yayın Bilgisi: (2004)

Compact millimeter-range microwave oscillators with high-current relativistic electron beams; Program abstracts of the 9th International Conference on High-Power Particle Beams: BEAMS'92, Washington DC, may 25-29, 1992
Yazar:: Mesyats G. A. Gennady Andreyevich
Baskı/Yayın Bilgisi: (1992)

Deposition of thin metal films by intense ion beams on metals; Technical Physics Letters; Vol. 22, iss. 4
Baskı/Yayın Bilgisi: (1996)

Ecton processes in pulsed high-current electron beams; Proceedings of the 12th International Conference on High-power Particle Beams, Haifa, june 7-12, 1998; Vol. 1
Yazar:: Mesyats G. A. Gennady Andreyevich
Baskı/Yayın Bilgisi: (1998)

Generation and amplification of microwave radiation with the use ot high-current small-size accelerators; Proceedings of the VIth International Conference on High-Power Particle Beams: BEAMS-86, Kobe,1986
Baskı/Yayın Bilgisi: (1986)

High intensity implantation of aluminium lons into titanium; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Baskı/Yayın Bilgisi: (2004)

High-power critical electron emission from dielectric induced by injection of high-current-density electron beam; Pulsed Power Conference (PPC); Vol. 1
Yazar:: Vaisburd D. I.
Baskı/Yayın Bilgisi: (1997)

Investigation of characteristics of titanium coatings deposited by powerful lon beams; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
Baskı/Yayın Bilgisi: (2010)

Ultradisperse powders obtained by sputtering a target with high-power nanosecond pulsed ion beam; Technical Physics Letters; Vol. 26, iss. 12
Baskı/Yayın Bilgisi: (2000)

Chromium films deposition by hot target high power pulsed magnetron sputtering: Deposition conditions and film properties; Surface and Coatings Technology; Vol. 375
Baskı/Yayın Bilgisi: (2019)

Modification of hard alloy by the action of high power ion beams; Surface and Coatings Technology; Vol. 206
Baskı/Yayın Bilgisi: (2011)

Patterning GaSe by High-Powered Laser Beams; ACS Omega; Vol. 5, iss. 17
Baskı/Yayın Bilgisi: (2020)

Influence of Vacuum Condition on Generation and Transportation of a High-Intensity Pulsed Ion Beam; EAPPC with BEAMS and MEGAGAUSS, 2016 Estoril [EAPPC 2016, 6th Euro-Asian Pulsed Power Conference ; BEAMS 2016, 21st International Conference on High-Power Particle Beams ; MG-XV, 15th International Conference on Megagauss Magnetic Field Generation and Rlated Tpics]
Baskı/Yayın Bilgisi: (2016)

Deposition of biocompatible calcium-phosphate coatings by high power lon beam ablation plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
Baskı/Yayın Bilgisi: ()

The regularities of solid surface erosion and coating deposition using high-power pulsed beams of charged particles; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 292
Yazar:: Bleykher (Bleicher) G. A. Galina Alekseevna
Baskı/Yayın Bilgisi: (2012)

Plasma Forming by Spreading of Pulsed Electron Beam in High Pressure Gases; EAPPC with BEAMS and MEGAGAUSS, 2016 Estoril [EAPPC 2016, 6th Euro-Asian Pulsed Power Conference ; BEAMS 2016, 21st International Conference on High-Power Particle Beams ; MG-XV, 15th International Conference on Megagauss Magnetic Field Generation and Rlated Tpics]
Yazar:: Remnev G. E. Gennady Efimovich
Baskı/Yayın Bilgisi: (2016)

Ion processing of zirconium ceramics by high-power pulsed beams; Technical Physics; Vol. 60, iss. 1
Baskı/Yayın Bilgisi: (2015)

High-power ion beam sources for industrial application; Surface and Coatings Technology; Vol. 96, iss. 1
Baskı/Yayın Bilgisi: (1997)

High-Power Pulsed Ion Accelerators and Their Practical Application; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Yazar:: Remnev G. E. Gennady Efimovich
Baskı/Yayın Bilgisi: (2019)

PETN detonation initiated by a high-power electron beam; Technical Physics Letters; Vol. 29, № 8
Baskı/Yayın Bilgisi: (2003)