Screening of polymeric membranes for membrane assisted deacidification of sardine oil
| Parent link: | Resource-Efficient Technologies: electronic scientific journal/ National Research Tomsk Polytechnic University (TPU).— , 2015-.— 2405-6537 Vol. 2, Suppl. 1.— 2016.— [P. S119–S123] |
|---|---|
| Other Authors: | Sampath Charanyaa, Chandrasekar Vaisali, Belur P. D. Prasanna, Regupathi I. |
| Summary: | Title screen The diversification in fish oil use and the need for softer processing demand new oil refining processes. In considering the advantages of membrane technology, three different membranes (polyamide (PA), polytetrafluoroethylene (PTFE) and polyethersulfone (PES)) were used in this particular study. Preliminary results in the separation of free fatty acids (FFA) from glycerides of sardine oil/ethanol mixtures using a single dead end microfiltration mode have been reported here. The influence of experimental factors like pressure and oil/ethanol ratios (w/v) on the permeate flux and the reduction of FFA (%) in the permeate was studied. PTFE membrane showed promising results in terms of residual FFA in permeate (%), % oil loss (15.12%, 5.45%) as compared to PA (20.50%, 6.66%) and PES membranes (20.60%, 8.92%). PA membrane showed a higher flux of 4.4 L/m2 /h, followed by PTFE 3.34 L/m2 /h and PES, 1.19 L/m2 /h at 3.5 bar trans-membrane pressure. These results showed that using PTFE membrane could be an ideal strategy for the membrane assisted deacidification of sardine oil using solvents. |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://earchive.tpu.ru/handle/11683/50245 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=570942 |
Similar Items
Preparation and characterization of porous PTFE membranes prepared by electrospinning method; Химия и химическая технология в XXI веке
by: Kolesnik I. M.
Published: (2020)
by: Kolesnik I. M.
Published: (2020)
Characterization and Determination of the Biocompatibility of Porous Polytetrafluoroethylene Membranes Fabricated via Electrospinning; Journal of Fluorine Chemistry; Vol. 246
Published: (2021)
Published: (2021)
Nonwoven PTFE Membranes Fabricated by Electrospinning Method: Preparation and Characterization; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Published: (2020)
Published: (2020)
Effect of heat treatments and aggressive media on mechanical properties of porous polytetrafluoroethylene membranes fabricated via electrospinning; Journal of Fluorine Chemistry; Vol. 264
Published: (2022)
Published: (2022)
Deposition of nanosized polymer films by electron-beam dispersion of polytetrafluoroethylene in vacuum on the track membrane surface; Материалы и технологии новых поколений в современном материаловедении
Published: (2016)
Published: (2016)
The modified membranes; Химия и химическая технология в XXI веке; Т. 2
by: Titova E. N. Elena Nikolaevna
Published: (2011)
by: Titova E. N. Elena Nikolaevna
Published: (2011)
Нетканные полимерные мембраны из политетрафторэтилена, сформированные методом электроформования: получение и свойства; Современные материалы и технологии новых поколений
by: Колесник И. М.
Published: (2019)
by: Колесник И. М.
Published: (2019)
Studying the Surface Properties of High-Molecular-Weight Membranes Obtained by Radiation Polymerization; AIP Conference Proceedings; Vol. 2101 : Isotopes: Technologies, Materials and Application (ITMA-2018)
Published: (2019)
Published: (2019)
Neutrophil Immunomodulatory Activity of Farnesene, a Component of Artemisia dracunculus Essential Oils; Pharmaceuticals; Vol. 15, iss. 5
Published: (2022)
Published: (2022)
Neutrophil Immunomodulatory Activity of Nerolidol, a Major Component of Essential Oils from Populus balsamifera Buds and Propolis; Plants; Vol. 11, iss. 23
Published: (2022)
Published: (2022)
Система полимерные мембраны на основе ПТФЭ, сформированные методом электроформования; Физико-технические проблемы в науке, промышленности и медицине. Российский и международный опыт подготовки кадров
by: Колесник И. М.
Published: (2020)
by: Колесник И. М.
Published: (2020)
Responsive Membranes and Materials
Published: (Chichester, Wiley, 2013)
Published: (Chichester, Wiley, 2013)
Processing of Industrial Metallurgical Wastes as the Basis of Manufacturing Technology Welding Fluxes and Additives NIM1; Key Engineering Materials; Vol. 736 : Materials and their Application
Published: (2017)
Published: (2017)
Membrane biophysics study guide
by: Antonov V. F.
Published: (Иркутск, ИГМУ, 2022)
by: Antonov V. F.
Published: (Иркутск, ИГМУ, 2022)
Свойства полиэтилентерефталатных трековых мембран с полимерным слоем, полученным магнетронным распылением политетрафторэтилена в вакууме; Материалы и технологии новых поколений в современном материаловедении
by: Ахметшарипова Т. К.
Published: (2016)
by: Ахметшарипова Т. К.
Published: (2016)
Пористые мембраны из политетрафторэтилена, полученные методом электроформования с последующим спеканием; Перспективы развития фундаментальных наук; Т. 2 : Химия
by: Колесник И. М.
Published: (2020)
by: Колесник И. М.
Published: (2020)
Studying the surface properties of high-molecular-weight membranes obtained by radiation polymerization; AIP Conference Proceedings; Vol. 2101 : Isotopes: Technologies, Materials and Application (ITMA-2018)
Published: (2019)
Published: (2019)
Efficient continuous removal of nitrates from water with cationic cellulose nanopaper membranes; Resource-Efficient Technologies; Vol. 3, iss. 1
by: Mautner A. Andreas
Published: (2017)
by: Mautner A. Andreas
Published: (2017)
Влияние режима термической обработки и агрессивных сред на механические свойства мембран из политетрафторэтилена, изготовленных методом электроспиннинга; Перспективные материалы конструкционного и функционального назначения
Published: (2022)
Published: (2022)
Theoretical and experimental study of methane partial oxidation tosyngas in catalytic membrane reactor with asymmetricoxygen-permeable membrane; Catalysis Today; Vol. 268 : Catalysis in Membrane Reactors (ICCMR12)
Published: (2016)
Published: (2016)
Preparation, Structure, and Properties of Track-Etched Membranes Based on Polylactic Acid; Membranes and Membrane Technologies; Vol. 3, iss. 5
Published: (2021)
Published: (2021)
Composition Polymeric Membranes Based on the VDF-TeFE Copolymer Formed by Electrospinning; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
by: Tverdokhlebova T. S. Tamara Sergeevna
Published: (2020)
by: Tverdokhlebova T. S. Tamara Sergeevna
Published: (2020)
Radiation-Chemical Modification of PVDF Films as a Method of Creating Proton-Conducting Membranes; Key Engineering Materials; Vol. 683 : Multifunctional Materials: Development and Application
by: Sokhoreva V. V. Valentina Viktorovna
Published: (2016)
by: Sokhoreva V. V. Valentina Viktorovna
Published: (2016)
Effect of Dual Surface Cooling on the Temperature Distribution of a Nuclear Fuel Pellet; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
by: Odii Christopher Joseph
Published: (2018)
by: Odii Christopher Joseph
Published: (2018)
Quality of Metal Deposited Flux Cored Wire with the System Fe-C-Si-Mn-Cr-Mo-Ni-V-Co; Key Engineering Materials; Vol. 736 : Materials and their Application
Published: (2017)
Published: (2017)
Technological Improvement of Surfacing of Parts of Hammer Crushers Used in Coke-Chemical Industry; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
Published: (2018)
Published: (2018)
Sterilization influence on pet track membrane properties; Перспективы развития фундаментальных наук; Т. 1 : Физика
by: Filippova E. O. Ekaterina Olegovna
Published: (2016)
by: Filippova E. O. Ekaterina Olegovna
Published: (2016)
Composite Ferroelectric Membranes Based on Vinylidene Fluoride-Tetrafluoroethylene Copolymer and Polyvinylpyrrolidone for Wound Healing; Membranes; Vol. 11, iss. 1
Published: (2021)
Published: (2021)
Sterilization influence on pet track membrane properties; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
by: Filippova E. O. Ekaterina Olegovna
Published: (2015)
by: Filippova E. O. Ekaterina Olegovna
Published: (2015)
Surface morphology of antiadgesive membranes obtainedby the electrospinning for medical application; Иностранный язык в контексте проблем профессиональной коммуникации
by: Khodyrevskaya Y. I.
Published: (2015)
by: Khodyrevskaya Y. I.
Published: (2015)
Possibility of Using Nuclear Track Membrane for Ophthalmology; Advanced Materials Research : Radiation and nuclear techniques in material science; Vol. 1084 : Physical-Technical Problems of Nuclear Science, Energy Generation, and Power Industry (PTPAI -2014)
by: Bosykh E.
Published: (2015)
by: Bosykh E.
Published: (2015)
Effect of hydroxybenzoic acids antioxidants on the oxidative stability of sardine oil; Resource-Efficient Technologies; Vol. 2, Suppl. 1
by: Vaisali Chandrasekar
Published: (2016)
by: Vaisali Chandrasekar
Published: (2016)
Solvent Extraction and Liquid Membranes. Fundamentals and Applications in New Materials
Published: (Boca Raton, CRC Press, 2008)
Published: (Boca Raton, CRC Press, 2008)
Sterilization influence on PET track membrane properties; AIP Conference Proceedings; Vol. 1772 : Prospects of Fundamental Sciences Development (PFSD-2016)
Published: (2016)
Published: (2016)
Electron Beam-Assisted Synthesis of YAG:Ce Ceramics; Materials; Vol. 16, iss. 11
Published: (2023)
Published: (2023)
Composite fluoropolymer piezoelectric membranes for reconstructive surgery; Journal of Physics: Conference Series; Vol. 1611 : Prospects of Fundamental Sciences Development (PFSD-2020)
Published: (2020)
Published: (2020)
Obtaining and characteristics of radiation-modified proton-exchange polypropylene membranes; Изотопы: технологии, материалы и применение
by: Mukhambetalin D. B. Danyshpan Bolatuly
Published: (2020)
by: Mukhambetalin D. B. Danyshpan Bolatuly
Published: (2020)
Thermosyphon-assisted cooling system working in the moderate heat flux range; Thermal Science and Engineering Progress; Vol. 32
Published: (2022)
Published: (2022)
Steam Sterilization Effect on the PET Track-Etched Membranes Properties; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
by: Filippova E. O. Ekaterina Olegovna
Published: (2018)
by: Filippova E. O. Ekaterina Olegovna
Published: (2018)
Experimental Study of Sliding Friction for PET Track Membranes; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
by: Filippova E. O. Ekaterina Olegovna
Published: (2016)
by: Filippova E. O. Ekaterina Olegovna
Published: (2016)
Similar Items
-
Preparation and characterization of porous PTFE membranes prepared by electrospinning method; Химия и химическая технология в XXI веке
by: Kolesnik I. M.
Published: (2020) -
Characterization and Determination of the Biocompatibility of Porous Polytetrafluoroethylene Membranes Fabricated via Electrospinning; Journal of Fluorine Chemistry; Vol. 246
Published: (2021) -
Nonwoven PTFE Membranes Fabricated by Electrospinning Method: Preparation and Characterization; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Published: (2020) -
Effect of heat treatments and aggressive media on mechanical properties of porous polytetrafluoroethylene membranes fabricated via electrospinning; Journal of Fluorine Chemistry; Vol. 264
Published: (2022) -
Deposition of nanosized polymer films by electron-beam dispersion of polytetrafluoroethylene in vacuum on the track membrane surface; Материалы и технологии новых поколений в современном материаловедении
Published: (2016)