High intensity implantation of aluminium lons into titanium; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)

High intensity implantation of aluminium lons into titanium; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)

Detaylı Bibliyografya
Parent link:	7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004).— 2004.— P. 221-224
Diğer Yazarlar:	Kurzina I. A. Irina Aleksandrovna, Bozhko I. A. Irina Aleksandrovna, Kalashnikov M. P. Mark Petrovich, Fortuna S. V., Ryabchikov A. I. Aleksandr Ilyich, Stepanov I. B. Igor Borisovich, Sivin D. O. Denis Olegovich, Sharkeev Yu. P. Yury Petrovich, Kozlov E. V.
Özet:	Phase composition, structural state and mechanical properties of the ion-alloyed surfacelayer of titanium target implanted with Al ions have been investigated. Ion implantation of the Al ions into titanium was carried out using the vacuum-arc, ion-beam and plasma-flow source "Raduga-5". The implantation at the high intensity mode allowed to obtain the ion-alloyed layer with thickness equal to 2600 nm. By the transmission electron microscopy it was established that the fine dispersed equilibrium intermetallic phases Ti3Al, TiAl and the solid solution of aluminium in titanium were formed in the surface alloyed titanium layer. Additionally, the formation of TiAl3 phase was monitored by means of X-ray diffraction. It was established that the average size of precipitates of the formed phases was equal to 70 nm. Moreover, the agglomeration of the intermetallic particles up to size of 584 nm took place. It was established that the ion-alloyed Ti layer consisting the intermetallic phases was thermostable. The base phase composition remained the same after annealing at 473 K for 1 h. It was found out, that the mechanical properties of the implanted titanium were higher than of the unimplanted material. The microhardness of the implanted titanium sample was in 1.5-3 times higher than the microhardness of the unimplanted Ti. The wear of the implanted Ti was not changed in the temperature range 300-700 K
Dil:	Rusça
Baskı/Yayın Bilgisi:	2004
Konular:	труды учёных ТПУ
Materyal Türü:	Kitap Bölümü
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=239741

Benzer Materyaller

High Intensity Implantation of Aluminium Ions into Titanium; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (2004)

The high intensity implantation of aluminium ions into titanium; Korus 2004; V. 3
Baskı/Yayın Bilgisi: (2004)

Investigation of plasma filter Influence on lons charge state of Dc vacuum arc plasma; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Baskı/Yayın Bilgisi: (2004)

7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004): proceedings
Baskı/Yayın Bilgisi: (Tomsk, Institute of High Current Electronics SB RAS, 2004)

Investigation of characteristics of titanium coatings deposited by powerful lon beams; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
Baskı/Yayın Bilgisi: (2010)

Mechanical Properties of Titanium Films Deposited by Pulsed High-Power Ion Beams; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Baskı/Yayın Bilgisi: (2004)

Modification of electric properties of lithium niobate crystals by ion bombardment; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Baskı/Yayın Bilgisi: (2004)

Mass transfer of an implanted dopant in materials under high-power pulsed Ion beam impact; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Baskı/Yayın Bilgisi: (2004)

High-frequency short-pulsed metal plasma-immersion ion implantation using filtered DC vacuum-arc plasma. (Part 1); 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Yazar:: Ryabchikov A. I. Aleksandr Ilyich
Baskı/Yayın Bilgisi: (2004)

High-frequency short-pulsed metal plasma-immersion ion implantation using filtered DC vacuum-arc plasma. (Part 2); 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Yazar:: Ryabchikov A. I. Aleksandr Ilyich
Baskı/Yayın Bilgisi: (2004)

Deposition of biocompatible calcium-phosphate coatings by high power lon beam ablation plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
Baskı/Yayın Bilgisi: ()

Optical Properties of Alumina Implanted with Cobalt Ions; 9th International Conference on Modification of materials with Particle Beams and Plasma Flows, Tomsk, September 21-26, 2008
Yazar:: Kabyshev A. V. Alexander Vasilievich
Baskı/Yayın Bilgisi: (2008)

Modification of Ferrite Ceramics Properties by Intensive Pulsed Beam of Low-Energy Electrons; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (2004)

Microstructure of titanium alloy modified by high-intensity implantation of low- and high-energy aluminium ions; Surface and Coatings Technology; Vol. 391
Baskı/Yayın Bilgisi: (2020)

A Cathode Unit for High-Dose Implantation of Semiconductor Materials; 7 International conference on modification of materials with particle beams and plasma flows
Yazar:: Gricenko (Gritsenko) B. P. Boris Petrovich
Baskı/Yayın Bilgisi: (2004)

6th International Conference on Modification of Materials with Particle Beams and Plasma Flows: 23-28 September, 2002, Tomsk, Russia: proceedings
Baskı/Yayın Bilgisi: (Tomsk, Kursiv, 2002)

Formation of wear-resistant TiN and (Ti1-x, Alx)N coatings using Dc Fil-Tered vacuum arc plasma; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Baskı/Yayın Bilgisi: (2004)

The Structure-Phase State and Corrosion Resistance Modification of Austenitic Steel in Various Conditions Ion Implantation; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (2004)

Obtaining of the aluminium alloy surface by high velocity flux of electro discharge plasma; The 8th Korea-Russia International Symposium on Science and Technology (KORUS 2004), June 26 - July 3, 2004, Tomsk, Russia; Vol. 1
Yazar:: Sivkov A. A. Aleksandr Anatolyevich
Baskı/Yayın Bilgisi: (2004)

Photoelectrical Properties of aluminum Oxide After Implantation with Cobalt Ions; 10th International Conference on Modification of materials with Particle Beams and Plasma Flows, Tomsk, September 19-24, 2010
Yazar:: Kabyshev A. V. Alexander Vasilievich
Baskı/Yayın Bilgisi: (2010)

10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010: proceedings
Baskı/Yayın Bilgisi: (Tomsk, TPU Publishing House, 2010)

9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008: proceedings
Baskı/Yayın Bilgisi: (Tomsk, Publishing house of the IAO SB RAS, 2008)

Ion-heat modification of inorganic dielectrics properties; 6th International Conference on Modification of Materials with Particle Beams and Plasma Flows, 23-28 September, 2002, Tomsk, Russia : proceedings
Yazar:: Kabyshev A. V. Alexander Vasilievich
Baskı/Yayın Bilgisi: (2002)

High Intensity low Aluminum Ion Energy Implantation into Titanium; Ion Implantation Technology (IIT 2018)
Baskı/Yayın Bilgisi: (2018)

Repetitively-pulsed nitrogen implantation in titanium by a high-power density ion beam; Energy Fluxes and Radiation Effects (EFRE); International Conference on Modification of Materials with Particle Beams and Plasma Flows (16th CMM)
Baskı/Yayın Bilgisi: (2022)

High-intensity ion beams with submillisecond duration for synergistic of ion implantation and energy impact on the surface; Energy Fluxes and Radiation Effects (EFRE); International Conference on Modification of Materials with Particle Beams and Plasma Flows (16th CMM)
Baskı/Yayın Bilgisi: (2022)

Mechanical Properties of Titanium Films Deposited by Pulsed High-Power Ion Beams; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (2004)

High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma (Part I); 7 International conference on modification of materials with particle beams and plasma flows
Yazar:: Ryabchikov A. I. Aleksandr Ilyich
Baskı/Yayın Bilgisi: (2004)

High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma (Part II); 7 International conference on modification of materials with particle beams and plasma flows
Yazar:: Ryabchikov A. I. Aleksandr Ilyich
Baskı/Yayın Bilgisi: (2004)

Equipment and methods for hybrid technologies of ion beam and plasma surface materials modification; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
Yazar:: Ryabchikov A. I. Aleksandr Ilyich
Baskı/Yayın Bilgisi: ()

Mass Transfer of an Implanted Dopant in Materials under High-Power Pulsed Ion Beam Impact; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (2004)

A Plasma System for Low-Emissive Coating Deposition; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (2004)

Modification of Electric Properties of Lithium Niobate Crystals by Ion Bombardment; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (2004)

Coating deposition using vacuum arc and ablation metal plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
Yazar:: Ryabchikov A. I. Aleksandr Ilyich
Baskı/Yayın Bilgisi: ()

Microstructure of Titanium Alloy Modified by High-Intensity Implantation of Low- and MediumEnergy Aluminum Ions; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Baskı/Yayın Bilgisi: (2019)

Phenomenological Model of Dc Magnetron Discharge; 7 International conference on modification of materials with particle beams and plasma flows
Baskı/Yayın Bilgisi: (2004)

Research of Protective Properties of Microplasma Coatings; 7 International conference on modification of materials with particle beams and plasma flows
Yazar:: Butyagin P. I.
Baskı/Yayın Bilgisi: (2004)

Removing concrete surface by electric discharge; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
Baskı/Yayın Bilgisi: (2010)

Modification of 40X13 steel at high-intensity nitrogen ion implantation; Journal of Physics: Conference Series; Vol. 1115 : 6th International Congress "Energy Fluxes and Radiation Effects". 14th International Conference on Modification of Materials with Particle Beams and Plasma Flows (14th CMM)
Baskı/Yayın Bilgisi: (2018)

Development of technologies of multilayer nanostructure TiN/TiAlN coatings formation on titanium alloys; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
Yazar:: Ryabchikov A. I. Aleksandr Ilyich
Baskı/Yayın Bilgisi: (2010)