High-frequency short-pulsed metal plasma-immersion ion implantation using filtered DC vacuum-arc plasma. (Part 2); 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)

High-frequency short-pulsed metal plasma-immersion ion implantation using filtered DC vacuum-arc plasma. (Part 2); 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)

Opis bibliograficzny
Parent link:	7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004).— 2004.— P. 138-141
1. autor:	Ryabchikov A. I. Aleksandr Ilyich
Kolejni autorzy:	Ryabchikov I. A., Stepanov I. B. Igor Borisovich
Streszczenie:	An innovative concept in the development of advanced coating deposition and ion implantation method including an application of filtered DC metal plasma source and high-frequency short-pulsed negative bias voltage with a duty factor in the range 10 ÷ 99% are considered. The regularities of ion implantation and metal plasma deposition for metal samples are theoretically and experimentally investigated. Experimentally has been shown that metal plasma based ion implantation as well as high-concentration metal plasma ion implantation with compensation of ion surface sputtering by metal plasma deposition as well as ion-assisted coating deposition can be realized by variation of bias potential ranging from 0 V to 4 kV, pulse repetition rate smoothly adjusted in the range (2 ÷ 4.4)×105 p.p.s. and pulse duration ranging from 0,5 to 2 μs. Special features of the material treatment method depending on plasma concentration, pulse repetition rate and duty factor has been examined
Język:	rosyjski
Wydane:	2004
Hasła przedmiotowe:	труды учёных ТПУ
Format:	Rozdział
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=239707

Podobne zapisy

High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma (Part I); 7 International conference on modification of materials with particle beams and plasma flows
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2004)

High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma (Part II); 7 International conference on modification of materials with particle beams and plasma flows
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2004)

High-frequency short-pulsed metal plasma-immersion ion implantation using filtered DC vacuum-arc plasma. (Part 1); 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2004)

High-frequency short-pulsed metal plasma-immersion ion implantation using filtered DC vacuum-arc plasma; Part 2; IFOST 2012; Vol. 2
Wydane: (2012)

High-frequency short-pulsed metal plasma-immersion ion implantation using filtered DC vacuum-arc plasma; Part 1; IFOST 2012; Vol. 2
Wydane: (2012)

High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma; 8th International Workshop on Plasma-Based Ion Implantation and Deposition (China, September 18-22, 2005)
Wydane: (2005)

High-Frequensy Short-Pulsed Metal Plasma-Immersion Ion Implantion Or Deposition Using Filtered DC Vacuum-ARC Plasma; Surface and Coatings Technology; Vol. 201, № 15
Wydane: (2007)

Investigation of Plasma Filter Influence on Ions Charge State of DC Vacuum Arc Plasma; 7 International conference on modification of materials with particle beams and plasma flows
Wydane: (2004)

Investigation of plasma filter Influence on lons charge state of Dc vacuum arc plasma; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Wydane: (2004)

Aluminium vacuum arc plasma application for intermetallic layers formation using plasma immersion ion implantation method; Известия вузов. Физика; Т. 57, № 12/3
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2014)

Recent advances in surface processing with the filtered DC vacuum-arc plasma; Vacuum; Vol. 78, iss. 2-4
Wydane: (2005)

Development of filtered DC metal plasma ion implantation and coating deposition methods based on high-frequency short-pulsed bias voltage application; Vacuum; Vol. 78, iss. 2-4
Wydane: (2005)

Unfiltered Aluminium Vacuum Arc Plasma Application for High-Frequency Short-Pulse Plasma Immersion Ion Implantation; Advanced Materials Research : Advanced materials, synthesis, development and application; Vol. 880 : Prospects of Fundamental Sciences Development (PFSD-2013)
Wydane: (2014)

Formation of Wear-Resistant TiN and (Ti1-x, Alx)N Coatings Using DC Filtered Vacuum Arc Plasma; 7 International conference on modification of materials with particle beams and plasma flows
Wydane: (2004)

Coating deposition using vacuum arc and ablation metal plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: ()

High-frequency short-pulsed bias source for the ion-plasma material treatment; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2010)

Investigation of microdefects transformation on the coatings surface during vacuum-arc plasma deposition; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2010)

Investigation of Tungsten DC Vacuum Arc Characteristics. Technological Application; 7 International conference on modification of materials with particle beams and plasma flows
od: Stepanov I. B. Igor Borisovich
Wydane: (2004)

PVD of coatings based on plasma filter application; Korus 2001; Vol. 1
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2001)

Coating deposition using vacuum arc and ablation metal plasma; Surface and Coatings Technology; Vol. 203, № 17-18
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2009)

Formation of wear-resistant TiN and (Ti1-x, Alx)N coatings using Dc Fil-Tered vacuum arc plasma; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Wydane: (2004)

Vacuum arc filtered metal plasma application in hybrid technologies of ion-beam and plasma material processing; Surface and Coatings Technology; Vol. 201, № 19-20
Wydane: (2007)

High-frequency short-pulse bias potential as a universal method of Ion-beam and plasma treatment of conductive and dielectric materials using vacuum-arc and ablation plasma; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
Wydane: (2010)

Influence of Bias Parameters and Plasma Density on Vacuum Arc Macroparticle Accumulation; Materials and Manufacturing Processes; Vol. 30, iss. 12
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2015)

Molybdenum carbide embedded into carbon matrix synthesized by DC arc plasma; Gas Discharge Plasmas and Their Applications (GDP 2019)
od: Pak A. Ya. Aleksandr Yakovlevich
Wydane: (2019)

Low-energy high-current plasma immersion implantation of nitrogen ions in plasma of non-self-sustained arc discharge with thermionic and hollow cathodes; Surface and Coatings Technology; Vol. 340
Wydane: (2018)

Plasma-immersion formation of high-intensity gaseous ion beams; Vacuum; Vol. 165
Wydane: (2019)

Control of Vacuum Arc Macroparticles by High-Frequency Short-Pulsed Negative Bias Application; Indian Journal of Science and Technology; Vol. 8, iss. 36
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: (2015)

Equipment and methods for hybrid technologies of ion beam and plasma surface materials modification; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
od: Ryabchikov A. I. Aleksandr Ilyich
Wydane: ()

Filtered Vacuum Arc Plasma Application For Ion-Beam and Plasma Material Processing; The 19th International Conference on Surface Modification of Materials by Ion Beams (SMMIB-2015), November 22-27, 2015, The Empress Hotel, Chiang Mai, Thailand
Wydane: (2015)

Synthesis of ultra dispersed graphite-like materials in dc arc discharge plasma; Mendeleev 2019
od: Vasiljeva (Vassilyeva) Yu. Z. Yuliya Zakharovna
Wydane: (2019)

Mullit Synthesized by DC Arc Plasma; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Wydane: (2020)

Supersonic Flow of Vacuum Arc Plasma in a Magnetic Field; IEEE Transactions on Plasma Science; Vol. 49, iss. 9
Wydane: (2021)

Investigation of filtered vacuum arc plasma application for TiAlN and TiSiB coatings deposition using ion beam and plasma material processing; Surface and Coatings Technology; Vol. 296
Wydane: (2016)

(Ti, Al)N and (Ti, Al)N/TiN multilayer coating deposition using filtered vacuum arc plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
Wydane: ()

Plasma-assisted deposition of a three-layer structure by vacuum and gas arcs; IEEE Transactions on Plasma Science; Vol. 26, № 6
Wydane: (1998)

Effective processes for arc-plasma treatment in large vacuum chambers of technological facilities; IEEE Transactions on Plasma Science; Vol. 41, № 8
Wydane: (2013)

Efficient arc sources of gas-discharge plasma in vacuum-plasma production facilities; Известия вузов. Физика; Т. 55, № 12-2
Wydane: (2012)

Macroparticles number density decreasing on a substrate immersed in vacuum arc plasma at repetitively pulsed biasing; Известия вузов. Физика; Т. 57, № 12/3
Wydane: (2014)

Radiative Transport of Energy in SF Arc Plasma
od: Aubrecht V.
Wydane: (Tomsk, 2000)