Development of technologies of multilayer nanostructure TiN/TiAlN coatings formation on titanium alloys; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010

Development of technologies of multilayer nanostructure TiN/TiAlN coatings formation on titanium alloys; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010

Bibliografski detalji
Parent link:	10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010.— 2010.— P. 709-712
Glavni autor:	Ryabchikov A. I. Aleksandr Ilyich
Daljnji autori:	Stepanov I. B. Igor Borisovich, Silin D. O.
Sažetak:	Several approaches to formation of multilayer coatings of the (TiAl)N/TiN type are described in the paper. One of the variants of the technological process of the multilayer coating deposition was realized using one-element cathodes of the vacuum-arc evaporators made of Ti and Alin the reactionary gas medium. In the second variant the Ti cathode and TiAl cathode were used.The investigations have been performed at deposition of separate layers with the thickness within50-400 nm at the total coating thickness of 5-10 ηm. It is shown that multilayer coatings increase the erosion resistance by an order and essentially decrease the crack formation of coatings
Jezik:	engleski
Izdano:	2010
Teme:	труды учёных ТПУ
Format:	Poglavlje knjige
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=239602

Slični predmeti

(Ti, Al)N and (Ti, Al)N/TiN multilayer coating deposition using filtered vacuum arc plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
Izdano: ()

Structural modification of TiAlN coatings by preliminary Ti Ion bombardment of a steel substrate; Technical Physics; Vol. 61, iss. 3
Izdano: (2016)

The Interface Influence in TiN/SiN x Multilayer Nanocomposite Under Irradiation; Russian Physics Journal; Vol. 60, iss. 9
Izdano: (2018)

Formation of Wear-Resistant TiN and (Ti1-x, Alx)N Coatings Using DC Filtered Vacuum Arc Plasma; 7 International conference on modification of materials with particle beams and plasma flows
Izdano: (2004)

Hydrogen-Permeability of Titanium-Nitride (TiN) Coatings Obtained via the Plasma-Immersion Ion Implantation of Titanium and TiN Vacuum-Arc Deposition on Zr-1%Nb Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, iss. 4
Izdano: (2018)

Hydrogen selective filters based on nanostructured substrates and multilayer nanosize NbTi and TiNi layers; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
Izdano: (2010)

Керамика TiN/Ti[5]Si[3] полученная методом SPS; Перспективы развития фундаментальных наук
od: Усиков А. И. Антон Иванович
Izdano: (2014)

Interaction of Si Atom with the (001) Surface of TiN, AlN and TaN Compounds; Coatings; Vol. 13, iss. 8
Izdano: (2024)

Исследование трещиностойкости покрытий TiAlN методом скретч-тестирования.; Физическая мезомеханика; Т. 18, № 6
Izdano: (2015)

Testing of the Ti foil with TiN coating as an exit window of a pulsed electron accelerator; Vacuum; Vol. 199
Izdano: (2022)

TiN coating effect on the elastoplastic behaviour of Ti film for electron beam exit window; Vacuum; Vol. 143
Izdano: (2017)

Study of crack resistance of TiAlN coatings by scratch testing; Physical Mesomechanics; Vol. 20, iss. 2
Izdano: (2017)

Применение метода акустической эмиссии для исследованиия повреждаемости покрытия TiN; Дефектоскопия; № 7
Izdano: (2002)

Formation of wear-resistant TiN and (Ti1-x, Alx)N coatings using Dc Fil-Tered vacuum arc plasma; 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Russia, 25-30 July 2004)
Izdano: (2004)

Анализ качества покрытий систем Ti-Si, Ti-Al-Si и одноэлементного многослойного покрытия TiN; Современные техника и технологии; Т. 2
od: Ермошкин А. А.
Izdano: (2012)

Modeling of microstructure and elastic properties of nc-TiN/a-Si3N4 nanocomposite; Computational Materials Science; Vol. 123
Izdano: (2016)

Obtaining Ceramic Based on Si3N4 and TiN by Spark Plasma Sintering; Glass and Ceramics; Vol. 72, iss. 9
od: Evdokimov A. A. Andrey Anatolievich
Izdano: (2016)

Energy Flux at the Substrate During Dual Magnetron Sputtering of TiAlN Coating; Russian Physics Journal; № 11 - Vol. 65
Izdano: (2023)

Equipment and methods for hybrid technologies of ion beam and plasma surface materials modification; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
od: Ryabchikov A. I. Aleksandr Ilyich
Izdano: ()

Combustion Synthesis of AlN (Al3O3N), BN, ZrN, and TiN in Air and Ceramic Application; Chapter 5; Nitride Ceramics: Combustion Synthesis, Properties, and Applications
Izdano: (2014)

On the Synthesis Mechanism of TiN, ZrN, and HfN During Combustion of Mixtures of Aluminum Nanopowder with TiO2, ZrO2, and HfO2; Refractories and Industrial Ceramics; Vol. 60, iss. 4
od: Root L. O. Lyudmila Olegovna
Izdano: (2019)

Hydrogenation behavior of Ti-implanted Zr-1Nb alloy with TiN films deposited using filtered vacuum arc and magnetron sputtering; Applied Surface Science; Vol. 432, Pt. B
Izdano: (2018)

Получение керамики на основе Si3N4 И TiN методом искрового плазменного спекания; Стекло и керамика; № 10
od: Евдокимов А. А. Андрей Анатольевич
Izdano: (2015)

Формирование многослойных (TiAl)N/TiN-покрытий на титановых сплавах в условиях интенсивного ионного и электронного ассистирования; Известия вузов. Физика; Т. 54, № 11/2 (приложение)
Izdano: (2011)

Осаждение TiN с помощью дуальной магнетронной распылительной системы; Современные техника и технологии; Т. 3
od: Тупикова О. С. Ольга Сергеевна
Izdano: (2011)

Investigation of filtered vacuum arc plasma application for TiAlN and TiSiB coatings deposition using ion beam and plasma material processing; Surface and Coatings Technology; Vol. 296
Izdano: (2016)

К вопросу о механизме синтеза TiN, ZrN и HfN при сжигании смесей нанопорошка алюминия с диоксидами TiO2, ZrO2 и HfO2; Новые огнеупоры; № 8
od: Роот Л. О. Людмила Олеговна
Izdano: (2019)

Coating deposition using vacuum arc and ablation metal plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
od: Ryabchikov A. I. Aleksandr Ilyich
Izdano: ()

Dependence of physical, mechanical, and structural properties of TiN ceramics on temperature of spark plasma sintering; Nanotechnologies in Russia; Vol. 10, iss. 9-10
od: Sivkov A. A. Aleksandr Anatolyevich
Izdano: (2015)

Structure and Properties of CrN/TiN Multi-Layer Coatings Obtained by Vacuum-Arc Plasma-Assisted Deposition Method; Coatings; Vol. 13, iss. 2
Izdano: (2023)

О возможности полного использования продукта плазмодинамического синтеза для спекания TiN-керамики; Перспективы развития фундаментальных наук
od: Евдокимов А. А. Андрей Анатольевич
Izdano: (2014)

Прямой синтез нанодисперсного TiN в импульсной струе электроэрозионной плазмы; Современные техника и технологии; Т. 2
od: Сайгаш А. С. Анастасия Сергеевна
Izdano: (2008)

On the Hydrogen Permeability and Adhesion of TiN/Ti Coatings Produced on Zr-1% Nb Alloy by Vacuum Ion-Plasma Methods; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 14, iss. 5
Izdano: (2020)

Влияние легирования Ta на морфологию поверхности, микроструктуру и механические характеристики покрытий TiAlN; Перспективные материалы конструкционного и медицинского назначения
Izdano: (2018)

Свойства покрытий TiAlN, полученных методом вакуумно-дугового испарения; Физико-технические проблемы в науке, промышленности и медицине (ФТПНПМ-2019)
od: Гусс Л. Е.
Izdano: (2019)

Адсорбция атома кремния на поверхностях (001) и (110) соединений TiN, TaN, AlN: расчеты из первых принципов; Перспективы развития фундаментальных наук; Т. 1 : Физика
od: Огнев С. О. Сергей Олегович
Izdano: (2023)

High-frequency short-pulsed bias source for the ion-plasma material treatment; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
od: Ryabchikov A. I. Aleksandr Ilyich
Izdano: (2010)

Investigation of microdefects transformation on the coatings surface during vacuum-arc plasma deposition; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
od: Ryabchikov A. I. Aleksandr Ilyich
Izdano: (2010)

Manufacture of an Ultrafine-Grained TiN–Cu Composition Using an Erosion-Type Coaxial Hybrid Magnetoplasma Accelerator; Russian Physics Journal; Vol. 58, № 8
od: Sivkov A. A. Aleksandr Anatolyevich
Izdano: (2015)

The Feasibility of Usage TiN and CrN Barrier Sublayers for Improving the Adhesion of Polycrystalline Diamond Films on WC-Co Hard Alloys; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
od: Linnik S. A. Stepan Andreevich
Izdano: (2016)