Investigation of Tungsten DC Vacuum Arc Characteristics. Technological Application; 7 International conference on modification of materials with particle beams and plasma flows

Investigation of Tungsten DC Vacuum Arc Characteristics. Technological Application; 7 International conference on modification of materials with particle beams and plasma flows

Dades bibliogràfiques
Parent link:	7 International conference on modification of materials with particle beams and plasma flows.— 2004.— [P. 1-5]
Autor principal:	Stepanov I. B. Igor Borisovich
Altres autors:	Ryabchikov A. I. Aleksandr Ilyich, Dektyarev S. V. Sergey Valentinovich
Sumari:	Title from the title-page. The paper presents the results of investigation of regularities of generation of W vacuum arc plasma continuous flows and their application for deposition of coatings with high adhesion strength. The developed construction of the vacuum arc evaporator (VAE) ensures dc mode of W plasma generation in the current range of 350 A - 750 A at arc voltage drop of more than 40 V. It is shown that at discharge current of 750 A W coating deposition rate can achieve 80 μm/h, which offers attractive perspectives for a number of technological applications of W plasma. We also investigated some regularities of changes in element composition, adhesion strength, hardness, morphology and structure of W coatings formed from plasma of a dc vacuum arc discharge (VAD) depending on regimes of coating deposition. It is shown that use of Ti plasma for generation of a thick transition and damping layer under the regime of plasma immersion ion implantation and coating deposition under intensive ion mixing allows increase adhesion strength of W coatings by several times. Режим доступа: из корпоративной сети ТПУ Text files
Idioma:	anglès
Publicat:	2004
Matèries:	физика плазма вакуумные дуги генерация разрядный ток покрытия осаждение разряды ионная имплантация технологическое применение труды учёных ТПУ электронный ресурс
Accés en línia:	http://www.lib.tpu.ru/fulltext2/c/2004/C13/054.pdf
Format:	MixedMaterials Electrònic Capítol de llibre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=234138

Ítems similars

High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma (Part I); 7 International conference on modification of materials with particle beams and plasma flows
per: Ryabchikov A. I. Aleksandr Ilyich
Publicat: (2004)

High-Frequency Short-Pulsed Metal Plasma-Immersion Ion Implantation Using Filtered DC Vacuum-Arc Plasma (Part II); 7 International conference on modification of materials with particle beams and plasma flows
per: Ryabchikov A. I. Aleksandr Ilyich
Publicat: (2004)

Investigation of Regularities of High-Intensity Ion Implantation in Combination with Subsequent Exposure to the Surface of a High-Current Electron Beam; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Publicat: (2020)

The Structure-Phase State and Corrosion Resistance Modification of Austenitic Steel in Various Conditions Ion Implantation; 7 International conference on modification of materials with particle beams and plasma flows
Publicat: (2004)

The influence of changes in the composition of substrate on the mechanical properties of coatings; Mechanical Engineering, Automation and Control Systems (MEACS)
per: Ilina A. S.
Publicat: (2015)

Formation of Wear-Resistant TiN and (Ti1-x, Alx)N Coatings Using DC Filtered Vacuum Arc Plasma; 7 International conference on modification of materials with particle beams and plasma flows
Publicat: (2004)

High Intensity Implantation of Aluminium Ions into Titanium; 7 International conference on modification of materials with particle beams and plasma flows
Publicat: (2004)

Investigation of filtered vacuum arc plasma application for TiAlN and TiSiB coatings deposition using ion beam and plasma material processing; Surface and Coatings Technology; Vol. 296
Publicat: (2016)

Микропроцессорная техника конспект лекций для студ. спец. 220401 "мехатроника" очн. формы обучения
per: Засов В. А.
Publicat: (Самара, СамГУПС, 2008)

Mass Transfer of an Implanted Dopant in Materials under High-Power Pulsed Ion Beam Impact; 7 International conference on modification of materials with particle beams and plasma flows
Publicat: (2004)

Filtered Vacuum Arc Plasma Application For Ion-Beam and Plasma Material Processing; The 19th International Conference on Surface Modification of Materials by Ion Beams (SMMIB-2015), November 22-27, 2015, The Empress Hotel, Chiang Mai, Thailand
Publicat: (2015)

Introduction of hydrogen into titanium by plasma methods; Journal of Physics: Conference Series; Vol. 1115 : 6th International Congress "Energy Fluxes and Radiation Effects". 14th International Conference on Modification of Materials with Particle Beams and Plasma Flows (14th CMM)
Publicat: (2018)

Numerical simulation of high-intensity metal ion beam generation; Journal of Physics: Conference Series; Vol. 1115 : 6th International Congress "Energy Fluxes and Radiation Effects". 14th International Conference on Modification of Materials with Particle Beams and Plasma Flows (14th CMM)
Publicat: (2018)

Unfiltered Aluminium Vacuum Arc Plasma Application for High-Frequency Short-Pulse Plasma Immersion Ion Implantation; Advanced Materials Research : Advanced materials, synthesis, development and application; Vol. 880 : Prospects of Fundamental Sciences Development (PFSD-2013)
Publicat: (2014)

Investigation of Plasma Filter Influence on Ions Charge State of DC Vacuum Arc Plasma; 7 International conference on modification of materials with particle beams and plasma flows
Publicat: (2004)

Плазменно-иммерсионная ионная имплантация алюминия в титан ВТ1-0; Перспективы развития фундаментальных наук
per: Сутыгина А. Н. Алина Николаевна
Publicat: (2015)

Hydrogen-Permeability of Titanium-Nitride (TiN) Coatings Obtained via the Plasma-Immersion Ion Implantation of Titanium and TiN Vacuum-Arc Deposition on Zr-1%Nb Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, iss. 4
Publicat: (2018)

Выравнивающие устройства для аккумуляторных батарей; Схемотехника; № 5
per: Онышко А.
Publicat: (2003)

Influence of ion implantation on mechanical properties of U8А steel and cobalt-tungsten carbide plates; Energy Fluxes and Radiation Effects (EFRE-2016)
Publicat: (2016)

Полевая ионная микроскопия радиационных повреждений на атомно-чистой поверхности и в приповерхностном объёме металлических материалов; Известия вузов. Физика; Т. 54, № 1/2 : Радиационно-термические эффекты и процессы в неорганических материалах
per: Ивченко В. А.
Publicat: (2011)

Modification of stainless steel based on synergistic of low-energy high-intensity ion implantation and high-current electron beam impact on the surface layer; Journal of Physics: Conference Series; Vol. 2064 : Gas Discharge Plasmas and Their Applications (GDP 2021)
Publicat: (2021)

Ионная имплантация в металлы
per: Комаров Ф. Ф. Фадей Фадеевич
Publicat: (Москва, Металлургия, 1990)

Ионная имплантация в полупроводики и другие материалы: сборник статей; пер. с англ.
Publicat: (Москва, Мир, 1980)

Формирование концентрационных профилей имплантируемых ионов в титане и никеле в зависимости от структуры образцов и режимов облучения; Известия вузов. Физика; Т. 54, № 1/2 : Радиационно-термические эффекты и процессы в неорганических материалах
Publicat: (2011)

Ионная имплантация в полупроводниках и других материалах: материалы VII-ой Международной конференции, 26-28 сентября 1983 г. г. Вильнюс
Publicat: (Вильнюс, Изд-во Вильнюсского ун-та, 1985)

Ионная имплантация: сборник статей
Publicat: (Москва, Металлургия, 1985)

Дифракционные методы изучения материалов и приборных структур. Ионная имплантация
per: Бублик В. Т.
Publicat: (Москва, МИСИС, 2013)

Основы технологии электронной компонентной базы : практикум
per: Астахов В. П.
Publicat: (Москва, МИСИС, 2016)

Thermal-Diffusion Model of Ion Implantation with Soret and Dufour Effects; Surface Modification of Materials by Ion Beams (SMMIB-2019)
per: Chepak-Gizbrekht M. V. Mariya Vladimirovna
Publicat: (2019)

Metal Surface Treatment with Particle Fluxes Taking into Account the Internal Boundary; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
per: Parfenova E. S. Elena Sergeevna
Publicat: (2016)

Plasma Immersion Ion Implantation for Surface Treatment of Complex Branched Structures; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Publicat: (2016)

Plasma-Immersion Modification of Nitinol Surface with Silicon to Improve the Corrosion Resistance of the Alloy in Biological Media; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
Publicat: (2017)

Effect of Surface Modification on Deformation Localization in NiTi at Cycling Tensile Loading; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Publicat: (2016)

Повышение прочности рабочих поверхностей интструмента методом ионной имплантации; Современные техника и технологии; Т. 1
per: Солдатов А. К.
Publicat: (2008)

Управление видом стружки посредством ионной имплантации инструментальной поверхности; Прогрессивные технологии и экономика в машиностроении; Т. 1
per: Ласуков А. А. Александр Александрович
Publicat: (2005)

Microstructure, Fatigue Strength and Erosion Resistance of MAX-Phase Embedded Ti-Si-B Nanostructured Coatings on Ti-6Al-4V; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publicat: (2019)

Modification of Electric Properties of Lithium Niobate Crystals by Ion Bombardment; 7 International conference on modification of materials with particle beams and plasma flows
Publicat: (2004)

Влияние ионной имплантации на шероховатость поверхностей и радиус скругления лезвия режущего инструмента: диссертация на соискание ученой степени кандидата технических наук
per: Хахина О. В. Ольга Васильевна
Publicat: (Томск, 2000)

The Effect of Thermal Annealing on Structural-phase Changes in the Ni–Ti Alloy Implanted with Krypton Ions; Russian Physics Journal; Vol. 59, iss. 2
per: Poltavtseva V. P. Valentina Petrovna
Publicat: (2016)

Влияние влаги на реакцию изомеризации н-гексана катализируемую суперкислотной ионной жидкостью; Известия Томского политехнического университета [Известия ТПУ]; Т. 322, № 3 : Химия
per: Ибрагимов А. А. Азамат Айдарович
Publicat: (2013)